You may also like
84200 Viega MegaPress reducer Smart Connect technology Carbon steel, 2'' x 1''
Manufacturer Resources
Product Specs
- Connection Type:
- FTG x P
- Material Type:
- Carbon Steel
- Model Number:
- 5915.1
- Product Dimension:
- 2'' x 1''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 4.488"
- Product Height:
- 2.374"
- Product Weight:
- 1.016 lbs
- Product Width:
- 2.374"
- Product Material:
- Carbon steel
Viega V84200 – Frequently Asked Questions
1) What size pipe does the Viega MegaPress 84200 reducing tee connect?
The 84200 is a 2 inch by 1 inch reducing tee, so the run is 2 inch and the branch takes 1 inch pipe. Both ends are press connections for carbon steel pipe, and the connection configuration is FTG x P, meaning one fitting-end that slips into a 2 inch press fitting and press socket ends elsewhere. Overall it measures 4.488 inches long by 2.374 inches wide by 2.374 inches high.
2) Can I use a MegaPress 84200 tee on copper or PEX?
No. The 84200 is a carbon steel press fitting, built for black iron and carbon steel pipe systems. Copper lines need a copper press or solder fitting, and PEX needs a PEX fitting system. Putting a carbon steel MegaPress fitting on copper tube is not a correct joint.
3) What does Smart Connect mean on this Viega press tee, and why does it matter during install?
Smart Connect is a feature in the sealing element that lets an unpressed joint leak detectably during pressure test, so a connection you missed shows up before the system is put in service. On a 2 inch by 1 inch reducing tee with three separate joints, that is the practical safeguard against burying an unpressed branch in a wall or ceiling.
4) Do I need threading or welding to tee a 1 inch branch off 2 inch black steel pipe?
Not with this fitting. The 84200 presses onto carbon steel pipe with a press tool and jaw, so you get a 1 inch branch off a 2 inch run with no threading, no cutting oil, and no hot work. That is the reason it gets specified in occupied buildings where a welding permit is a problem.
5) Where is the Viega 84200 MegaPress tee made, and what is the Viega model number?
Made in Germany, and Viega catalogs it as model 5915.1. The orderable part number is 84200. Those are the identifiers to quote if you're matching a spec or standardizing a carbon steel press system across a facility.
How fast can I get the Viega V84200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega V84200 come with a warranty?
Absolutely. The Viega V84200 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega V84200?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega V84200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.