84810 Viega MegaPress adapter Smart Connect technology Carbon steel, 2'' x 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 2'' x 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Adapters
- Product Type:
- Adapter
- Product Length:
- 3.701"
- Product Height:
- 2.894"
- Product Weight:
- 1.217 lbs
- Product Width:
- 2.894"
- Product Material:
- Carbon steel
Viega 84810 – Frequently Asked Questions
1) What are the two connection ends on the Viega 84810 MegaPress adapter?
One end is a MegaPress press connection and the other is female pipe thread, listed as P x FPT. The press end goes onto 2 inch black iron or carbon steel pipe with a press tool and jaw; the threaded end takes a 1-1/2 inch male NPT nipple or valve. So it is the transition piece when you need to get from pressed pipe to a threaded device.
2) Is the Viega 84810 a reducing adapter, and which size is the press side?
It is a reducing adapter: 2 inch on the press side, 1-1/2 inch on the female threaded side. Don't order it expecting 2 inch thread, and don't expect to press 1-1/2 inch pipe with it.
3) Can I use a carbon steel MegaPress fitting on copper or stainless tube?
No. The 84810 is carbon steel, made for carbon steel and black iron pipe. Pressing it onto copper tube mixes metals and the sizing is wrong as well. For copper you want a copper press fitting system; for stainless, a stainless press fitting.
4) What does Smart Connect do on a MegaPress fitting?
Smart Connect is Viega's feature that leaves an unpressed connection deliberately leaking during pressure test, so an installer can see which joint was missed before the system is buttoned up. On the 84810 it applies to the 2 inch press end only; the 1-1/2 inch female thread is a conventional threaded joint you seal with tape or dope.
5) Do I need a special press tool or jaw for a 2 inch MegaPress fitting?
Yes. The 2 inch press end requires a press tool with the matching 2 inch MegaPress jaw or ring, not a standard copper press jaw. The threaded 1-1/2 inch side needs no tool beyond pipe wrenches.
6) Where does the Viega 84810 get manufactured?
Made in Germany. Useful if you are submitting country of origin on a government or institutional job.
How fast can I get the Viega 84810 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 84810 come with a warranty?
Absolutely. The Viega 84810 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 84810?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 84810 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.