9" WRECKER, with NITRUS, Carbide SAWZALL Blade for Multi-Material (1 PK)
Features
- Cuts through the widest variety of materials: wood with nails and screws, roofing material, plaster and drywall, rigid conduit and black pipe
- Made in the USA
- 6TPI design for best material versatility
- 1/2" universal tang
- Best blade for residential demolition projects
- Fang Tip, design for fastest plunge cuts in woods, plaster and drywall
- Available in 6", 9" and 12" lengths in 1PKs, 3PKs, and 5PKs
Manufacturer Resources
Product Specs
- Product Type:
- Reciprocating Saw Blade
- Department:
- Electrical
- Product Subgroup:
- Saw Blades
- Blade Length:
- 9.0 in
- Country Of Origin:
- United States
- Blade Thickness:
- 0.05 in
- Product Group:
- Power Tools & Accessories
Milwaukee 48-00-5272 – Frequently Asked Questions
1) Will the Milwaukee 48-00-5272 WRECKER blade fit any reciprocating saw, or only a Sawzall?
It uses a 1/2 inch universal tang, so it mounts in any standard reciprocating saw blade clamp, not just a Milwaukee Sawzall. Blade body thickness is 0.050 inch, which is the usual recip blade stock.
2) Can one blade handle wood with embedded nails plus metal conduit and black pipe on a demo job?
That is what the 9 inch WRECKER with NITRUS carbide is built for. The 6 TPI carbide tooth design cuts nail-embedded wood, roofing material, plaster and drywall, rigid conduit and black pipe, so you are not swapping blades between wood and metal on a tear-out.
3) Can I plunge cut drywall and plaster with this blade without drilling a start hole?
Yes. The Fang Tip on the nose is shaped for plunge cutting, and Milwaukee calls out woods, plaster and drywall as the materials it plunges fastest in. Start the tip at an angle and let it bite before rolling the shoe flat.
4) Is 6 TPI the right tooth count for mixed demolition, or should I use a finer blade for metal?
6 TPI is the general-purpose pitch on the WRECKER, chosen for material versatility rather than for one material. It works through nail-embedded wood and also rigid conduit and black pipe. If you are cutting only thin-wall metal, sheet, or small-diameter tubing all day, a higher TPI metal-specific blade leaves a cleaner edge and lasts longer, because coarse teeth can straddle thin stock and strip.
5) For gutting a residential bathroom or kitchen, is the WRECKER the blade to stock on the truck?
For residential demolition it is the one blade to keep loaded. Milwaukee positions the WRECKER as its best blade for residential demo because a single 6 TPI carbide blade takes studs with nails, drywall and plaster, roofing, and the rigid conduit or black pipe you hit behind the wall. Property maintenance crews buying for mixed tear-outs usually stock the 9 inch for reach and a 6 inch for cabinet and joist-bay work.
How fast can I get the Milwaukee 48-00-5272 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 48-00-5272 come with a warranty?
Absolutely. The Milwaukee 48-00-5272 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 48-00-5272?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 48-00-5272 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.