You may also like
90395 Viega MegaPress cap Smart Connect technology 316 stainless steel, 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Caps
- Product Type:
- Tee
- Product Length:
- 2.323"
- Product Height:
- 1.535"
- Product Weight:
- 0.218 lbs
- Product Width:
- 1.535"
- Product Material:
- 316 stainless steel
Viega 90395 – Frequently Asked Questions
1) Is the Viega MegaPress 90395 made of stainless steel, and which grade?
It's 316 stainless steel, the grade specified for the MegaPress 90395. 316 is the choice when the line runs in a corrosive or wet environment, or where chloride exposure would attack a carbon steel fitting. The part is made in Germany.
2) What pipe size does the Viega 90395 MegaPress fitting connect to?
The 90395 is a 3/4 inch MegaPress fitting, so it presses onto 3/4 inch pipe. Order the matching size for your run; a MegaPress jaw set for 3/4 inch is what crimps it.
3) What is Smart Connect on the Viega MegaPress 90395 and why does it matter on inspection?
Smart Connect is Viega's unpressed-connection feature: an unpressed fitting leaks deliberately during pressure test so the installer finds it before the wall closes up. On a job with dozens of presses, that's the difference between catching a miss at test and chasing a leak later. The 90395 carries it.
4) How much room does the 3/4 inch Viega 90395 take up in a tight chase?
Body dimensions are 2.323 inches long by 1.535 inches wide by 1.535 inches high, and it weighs 0.218 lbs. Allow clearance beyond that for the press tool jaw to swing around the fitting, which is usually the limiting factor in a stud bay or chase, not the fitting itself.
5) Do I need to thread or weld the Viega 90395, or is it a press fitting?
No threading, no welding, no flame. The 90395 is a press-connect fitting: cut the pipe, deburr, mark insertion depth, and crimp with a MegaPress-approved press tool and the 3/4 inch jaw. That's why it gets used in occupied buildings where a hot work permit is a problem.
6) What is the manufacturer part number for the 3/4 inch 316 stainless MegaPress fitting?
Viega part number 90395. Give that number when ordering or matching a submittal; the size (3/4 inch) and the 316 stainless material are both tied to that single MPN.
How fast can I get the Viega 90395 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90395 come with a warranty?
Absolutely. The Viega 90395 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90395?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 90395 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.