You may also like
90625 Viega MegaPress tee Smart Connect technology 316 stainless steel, 3'' x 3'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 3'' x 3'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 7.48"
- Product Height:
- 4.181"
- Product Weight:
- 3.066 lbs
- Product Width:
- 4.87"
- Product Material:
- 316 stainless steel
Viega 90625 – Frequently Asked Questions
1) What are the three connections on the Viega MegaPress 90625 tee?
The 90625 is a reducing tee with two 3 inch press ends on the run and a 3/4 inch female threaded branch. Viega lists the connection type as P1 x P2 x FPT, so the run gets pressed onto 3 inch pipe and the branch takes a male-threaded fitting or nipple. Overall size is stated as 3 x 3 x 3/4 inches.
2) Is the Viega 90625 MegaPress tee stainless or carbon steel?
It is 316 stainless steel, not carbon steel. That matters if you are running the branch line in a corrosive or washdown environment, or tying into an existing stainless system where mixing carbon steel fittings would be a problem. Viega manufactures it in Germany.
3) Does the Viega 90625 tee have Smart Connect, and what does that actually do for me on the job?
Yes, the 90625 carries Viega's Smart Connect feature. The point of it is that an unpressed connection leaks visibly during pressure test, so you find the fitting you missed before the ceiling closes up rather than after. It does not change how you press the joint, it just makes a skipped press obvious.
4) Can I use a 3/4 inch FPT branch tee like this for a gauge, drain or small takeoff on a 3 inch line?
That is exactly what the branch is for. The 3/4 inch female thread on the 90625 accepts a male-threaded nipple, valve, drain or gauge assembly, so you can take a small service off a 3 inch pressed main without threading the main itself. The run stays press-connected on both 3 inch ends.
5) Is this the right part number if I need a 3 x 3 x 3/4 MegaPress stainless tee?
Order Viega part 90625. It is the 316 stainless MegaPress tee in 3 x 3 x 3/4, press by press by female thread. If your branch needs to be pressed instead of threaded, this is not the fitting, you want the press-branch version of the same size.
How fast can I get the Viega 90625 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90625 come with a warranty?
Absolutely. The Viega 90625 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90625?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 90625 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.