91190 Viega MegaPress flange Smart Connect technology 316 stainless steel, 1-1/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 1-1/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Flanges
- Product Type:
- Flange
- Product Length:
- 5.394"
- Product Height:
- 3.323"
- Product Weight:
- 2.962 lbs
- Product Width:
- 5.394"
- Product Material:
- 316 stainless steel
Viega 91190 – Frequently Asked Questions
1) What size pipe does the Viega 91190 MegaPress fitting connect to?
The Viega 91190 is a 1-1/4 inch MegaPress fitting. It presses onto 1-1/4 inch pipe, so confirm your run is that size before ordering, since press fittings are size-specific and cannot be adapted down.
2) Does the Viega 91190 require a press tool, or can it be threaded or soldered?
It is a press-connect fitting, not threaded and not solderable. You need a press tool with the correct MegaPress jaw or ring for 1-1/4 inch to make the joint. No flame, no threading, no soldering.
3) Can I mix the Viega 91190 stainless fitting into a run of carbon steel MegaPress pipe?
Match the fitting to the pipe. The 91190 is a 316 stainless steel fitting intended for stainless systems; putting stainless and carbon steel in direct contact in a wet line invites galvanic corrosion at the joint. If the run is black or galvanized carbon steel, use the carbon steel MegaPress fitting of the same 1-1/4 inch size instead.
4) What does Smart Connect technology on the Viega MegaPress 91190 actually do for the installer?
Smart Connect is Viega's feature that lets an unpressed connection be identified during pressure testing, so a joint you missed shows itself before the system is closed up. On a large commercial run with dozens of presses, that is the difference between finding the miss at test and finding it after the ceiling is back.
5) How much clearance do I need around the Viega 91190 MegaPress fitting?
The fitting measures 5.394 inches in length, 5.394 inches in width, and 3.323 inches in height, and weighs 2.962 lbs. Allow for that envelope plus the swing of the press jaw when you lay out the fitting near a wall, joist, or adjacent pipe, since the tool needs room to close square on the fitting.
How fast can I get the Viega 91190 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91190 come with a warranty?
Absolutely. The Viega 91190 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91190?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91190 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.