You may also like
91835 Viega MegaPress cap Smart Connect technology 316 stainless steel, 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Caps
- Product Type:
- Tee
- Product Length:
- 3.047"
- Product Height:
- 2.437"
- Product Weight:
- 0.719 lbs
- Product Width:
- 2.437"
- Product Material:
- 316 stainless steel
Viega 91835 – Frequently Asked Questions
1) What size pipe does the Viega 91835 MegaPress cap fit?
The Viega 91835 MegaPress cap is a 1-1/2 inch fitting, so it presses onto 1-1/2 inch pipe. It is a press-on cap, not a threaded plug, so no pipe threading or dope is needed to close off the end of a run.
2) Is the Viega 91835 MegaPress cap stainless steel or carbon steel?
It is 316 stainless steel, which is the grade Viega uses for MegaPress fittings going onto stainless pipe rather than black iron. If your run is carbon steel pipe, the stainless MegaPress line is not the matching family.
3) What does Smart Connect technology do on a Viega MegaPress fitting?
Smart Connect is Viega's feature that leaves an unpressed connection deliberately leaky during pressure testing, so an installer can spot a joint that was missed before the system is put into service. On the 91835 cap it gives you a way to verify the one joint on a dead end that would otherwise be easy to overlook.
4) How much room do I need to install a 1-1/2 inch MegaPress cap in a tight chase?
The cap itself measures 3.047 inches long and 2.437 inches across in both height and width. Add clearance for the press jaw around the fitting body, since the tool has to seat squarely on the press ring to make the joint.
5) Do I need to order a press ring or sealing element separately for the Viega 91835?
No. The 91835 arrives as a complete 1-1/2 inch press cap with its sealing element already in the fitting. What you supply is the press tool and the correct jaw or ring for 1-1/2 inch MegaPress, plus a properly cut and deburred pipe end.
6) How heavy is a 1-1/2 inch stainless MegaPress cap for shipping or a parts kit?
0.719 lbs each. Light enough that a box of them for a multi-building MRO kit stays easy to carry up a ladder.
How fast can I get the Viega 91835 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91835 come with a warranty?
Absolutely. The Viega 91835 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91835?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91835 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.