Klein Tools S9 9/32-Inch Nut D...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$63.01
$9.03
Klein Tools S9 9/32-Inch Nut Driver with 3-Inch Hollow Shank

Klein Tools S9 9/32-Inch Nut Driver with 3-Inch Hollow Shank

(No reviews yet) Write a Review

Model: S9
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$63.01
$9.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
9/32-Inch Nut Driver with 3-Inch Hollow Shank

  • Warnings

    • Always wear approved eye protection.
    • NOT insulated. Will NOT protect against electrical shock.

  • Features

    • Made in USA
    • Chrome-plated shaft helps prevent corrosion
    • Internal flanges provide solid, twist-resistant shaft anchor
    • Fits over long bolts and studs
    • Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
    • Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
    • Meets or exceeds applicable ASME / ANSI specifications
    • Nut Driver's standard length works for most applications


S9 - spec sheet

Manufacturer Resources

Product Specs

Handle Color:
Orange
Insulated:
No
Magnetic:
No
Measurement Standard:
SAE
Nut Driver Sizes:
9/32"
Overall Length:
6.625" (16.8 cm)
Shaft Length:
3" (7.6 cm)
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Height:
1.0000 in
Product Weight:
0.1500 lbs
Product Width:
1.0000 in
Product Depth:
6.6250 in
Product Type:
Nut Driver

Klein Tools S9 – Frequently Asked Questions

1) Can the Klein S9 nut driver go over a long bolt or threaded stud?
That is what the hollow shank is for. The S9 has a 3-inch hollow shaft that slides down over long bolts and studs so the socket can still seat on the nut, which is why it gets used on stacked circuit boards and standoff hardware where a solid-shank driver bottoms out. Working depth is limited to that 3 inches of shaft.
2) Is the Klein S9 nut driver safe to use on live electrical work?
No. The S9 is not insulated and will not protect against electrical shock. De-energize the circuit before using it. If you need to work on or near energized conductors, you need a driver rated and marked as insulated, not this one.
3) What nut size does the Klein S9 drive, and is it metric or SAE?
The S9 drives a 9/32-inch hex nut and is an SAE (inch) tool, not metric. There is no close metric equivalent that will hold properly, 7mm is undersize and will round the nut, so match it to fractional-inch hardware.
4) Will the Klein S9 nut driver pick up and hold a loose nut in a tight spot?
No. The S9 is not magnetic, so it will not retain a nut on the way into a panel or enclosure. Start the nut by hand, or use a magnetic-tip driver if you are working one-handed in a deep box.
5) Will the hollow shank on this Klein driver twist loose under torque?
The S9 uses internal flanges to anchor the shaft in the handle, which is what resists the shaft spinning in the grip under load. The shaft is also chrome-plated to resist corrosion, and the tool meets or exceeds applicable ASME/ANSI specifications.
6) What is the Klein part number to order the 9/32-inch hollow-shank nut driver?
Order it as Klein Tools S9. That is the manufacturer part number for the 9/32-inch, 3-inch hollow-shank driver, and the tool is made in the USA.
7) How long is the Klein S9 nut driver overall?
6.625 inches (16.8 cm) overall, with 3 inches of that being shaft. That is the standard-length version, which clears most panel and board work while still fitting a pouch. It weighs 0.15 lbs, so it is a pocket tool, not a bench driver.
8) How do I tell the 9/32 apart from the rest of my Klein nut drivers in the pouch?
Color. The S9 has an orange Comfordome handle, and Klein color-codes the handles by size so you can grab the right one without reading the stamp. Useful when you are carrying a full set and working overhead.
How fast can I get the Klein Tools S9 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools S9 come with a warranty?
Absolutely. The Klein Tools S9 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools S9?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools S9 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!