You may also like
94757 Viega ProPress tee Smart Connect technology Copper, 1-1/4'' x 1-1/4'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Copper
- Product Dimension:
- 1-1/4'' x 1-1/4'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 1.76"
- Product Height:
- 2.547"
- Product Weight:
- 0.465 lbs
- Product Width:
- 3.346"
- Product Material:
- Copper
Viega 94757 – Frequently Asked Questions
1) What pipe sizes does the Viega 94757 ProPress tee connect?
The Viega 94757 is a reducing copper press tee sized 1-1/4 inch x 1-1/4 inch x 1/2 inch. The run stays at 1-1/4 inch on both ends and the branch drops to 1/2 inch, so it is the fitting you use to pull a small branch (fixture drop, hose bibb, gauge or drain leg) off a 1-1/4 inch main without adding a separate bushing.
2) Can I press the Viega 94757 onto standard copper tube, or does it need a special pipe?
It is a copper fitting made for copper tubing. Press fittings of this type seal on the outside diameter of the tube with an EPDM sealing element, so the tube has to be cut square, deburred, and fully inserted to the stop before pressing. Copper material is confirmed in the spec as the product material.
3) What does Smart Connect mean on a Viega ProPress tee, and why does it matter on the job?
Smart Connect is Viega's unpressed-connection feature: a fitting that has been left unpressed leaks visibly during pressure testing so you find it before the wall closes. On a three-outlet fitting like the 94757, where it is easy to press the 1-1/4 inch run and forget the 1/2 inch branch, that is the feature doing real work. It does not replace a pressure test, it is what makes the test tell you something.
4) Should I use a reducing press tee like the 94757 or a full-size tee with a reducer bushing?
The reducing tee does it in one fitting and one set of presses. Running a 1-1/4 x 1-1/4 x 1-1/4 tee and then reducing the branch adds a second joint, more material, and more length in the bay, and every extra press is another connection that can be missed. Use the full-size tee plus a reducer only when you expect to upsize that branch later.
5) What is the exact part number and manufacturer for ordering this 1-1/4 x 1-1/4 x 1/2 copper press tee?
Order it as Viega part 94757, a ProPress copper reducing tee. It is made in Germany. Distributors and purchasing agents should note the full size callout 1-1/4 inch x 1-1/4 inch x 1/2 inch, since Viega's tee line carries many close reducing combinations under adjacent numbers.
How fast can I get the Viega 94757 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 94757 come with a warranty?
Absolutely. The Viega 94757 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 94757?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 94757 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.