Altronix AL400ULPD8 Power Supp...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$329.96
Altronix AL400ULPD8 Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12VDC at 4A or 24VDC at 3A, Grey Enclosure

Altronix AL400ULPD8 Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12VDC at 4A or 24VDC at 3A, Grey Enclosure

(No reviews yet) Write a Review

Model: AL400ULPD8

In Stock (leaves warehouse same day if ordered before 3pm ET)

$329.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
4A
Features:
Converts a 115VAC/60Hz Input into Eight (8) Class 2 Rated 12VDC or 24VDC Power Limited Outputs
Includes:
Includes Enclosure, Charger, 8 Fused Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL400ULPD8 – Frequently Asked Questions

1) Is 12V or 24V selectable on the AL400ULPD8, or do I order a specific voltage?
One unit covers both. The AL400ULPD8 converts the 115VAC input to either 12VDC or 24VDC outputs, so you set it for the voltage your locks or cameras need rather than ordering a voltage-specific model. Note the current changes with the choice: 4A at 12V, 3A at 24V.
2) Does the Altronix AL400ULPD8 come with a battery backup, or do I buy batteries separately?
It is a power supply/charger, so the charging circuit for standby batteries is built in and an enclosure is included. The batteries themselves are a separate purchase, sized to the standby time your system requires.
3) Will the AL400ULPD8 run motorized latch retraction exit devices?
Motorized latch retraction draws a high inrush and is normally handled by a supply built for it - the BEST RPSMLR2 Series is a power supply specifically for motorized latch retraction exit devices, and the BEST PS161-6 is intended for delayed egress exit devices with a 120V input, 12/24V output and 6A capacity. The Altronix AL400ULPD8 is a general-purpose 12VDC 4A or 24VDC 3A multi-output supply/charger for uses such as CCTV, fire alarm and POIP. Match the supply to the device manufacturer's stated power requirement before ordering.
4) For a Von Duprin electrified exit device, do I use the AL400ULPD8 or the PS902?
The Von Duprin PS902 is a base power supply rated 2A at 12/24 VDC, field selectable for access control, and is listed as Grade 1 - it is built to accept Von Duprin option boards for that manufacturer's electrified exit hardware. The Altronix AL400ULPD8 is a brand-neutral 115VAC input supply with eight fused 12VDC 4A or 24VDC 3A outputs and a charger. If the specification calls out the manufacturer's own option board architecture, the PS902 is the platform; if you are powering mixed devices from one enclosure, the Altronix is.
5) What input power does the AL400ULPD8 need at the panel?
Standard 115VAC 60Hz at 3.5A, which is ordinary 120V building power. Run a dedicated unswitched circuit to it, as you would for any access control or fire panel supply.
6) What else could I use if I only need to power one or two doors instead of eight?
A single-output supply is the cheaper and smaller path. The Securitron AQD1 is a 12/24VDC switching supply at 1 amp, the SDC 620 Series is a 1 amp regulated and filtered unit with dual voltage selection, and the Von Duprin PS902 is a 2A 12/24VDC field-selectable base supply. All are single-voltage-selectable like the AL400ULPD8 but without the eight fused output distribution.
7) Is the SDC 634 a substitute for the Altronix AL400ULPD8?
They share a current rating but not a topology. The SDC 634 Series is a 4 Amp regulated and filtered low voltage power supply with dual voltage selection - a single regulated DC source. The Altronix AL400ULPD8 also delivers 12VDC at 4A, but splits it across eight fused outputs and includes a battery charger in the grey enclosure. Use the 634 where one regulated feed is wanted; use the AL400ULPD8 where each device needs its own fused branch.
8) What looks like an alternative to the AL400ULPD8 but is not a drop-in replacement?
Several items in the same power family serve different roles. The ROFU 10305-LA is a power transfer hinge rated 1.5A at 42V, not a supply at all - it carries current through the door edge. The Command Access CAT Field Tester is a portable 12-24VDC tester that runs on DeWalt, Makita and Milwaukee batteries, for bench and site checks. The BEST ELR150 Series is a power supply control module. The Securitron BPSS is a boxed solar power supply. None of these replace a hardwired 115VAC 60Hz supply/charger with eight fused 12VDC 4A or 24VDC 3A outputs.
9) I need more than 4 amps at 12VDC - what steps up from the AL400ULPD8?
For a heavier 12VDC bus, the Securitron AQS1210 is a switching power supply rated 12 VDC at 10 Amp. The BEST PS161-6 lists a 120V input with 12/24V output and 6A capacity. The Altronix AL400ULPD8 sits below both at 12VDC 4A or 24VDC 3A, but it is the one of the three described with eight fused outputs and an onboard charger, so stepping up on amperage may mean adding separate distribution.
10) Which alternatives to the AL400ULPD8 include battery backup?
The Altronix AL400ULPD8 is a power supply/charger, so battery charging is part of the unit. Among comparable products, the Adams Rite PS-1 is a regulated 1 Amp 12/24 volt DC supply with battery backup, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Detex 10-800 Series is a universal logic controller with a 120VAC/24VDC supply and battery backup. Choose on the current your devices draw and whether you also need eight separate fused branches.
11) What comes in the box with the AL400ULPD8?
Board, charger circuit, eight fused outputs and the grey enclosure. Batteries, lock hardware, and any field wiring are supplied separately.
12) Is the AL400ULPD8 only for door access control, or can it feed cameras and fire devices too?
Altronix builds this as a general multi-output supply, used for general purpose loads, CCTV, fire alarm and POIP as well as access control. It is a commercial-duty unit, not a residential plug-in.
13) Can I use a plug-in supply instead of the AL400ULPD8?
Only for small single-device loads. The ROFU 9126T is a plug-in mini power supply at 12 VDC 1.5A with time delay, and the ROFU 9102-12D UL / 9102-24D takes a 10/120VAC 60Hz input. The Altronix AL400ULPD8 is a hardwired 115VAC 60Hz commercial unit supplying eight fused 12VDC or 24VDC outputs with a charger in a grey enclosure, which is what a multi-door or multi-camera install needs.
14) Which 24VDC-only supplies compare with the AL400ULPD8's 24VDC output?
The Altronix AL400ULPD8 delivers 24VDC at 3A across eight fused outputs, selectable against its 12VDC 4A mode. Fixed 24VDC alternatives include the Command Access PS1 Series linear supply at 1 Amp and the Command Access PS210, a UL 6E/CSA linear supply with 1.5A at 24VDC and boost circuitry. Both are single-output linear designs, so they suit one device rather than a distributed bank.
How fast can I get the Altronix AL400ULPD8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL400ULPD8 come with a warranty?
Absolutely. The Altronix AL400ULPD8 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL400ULPD8?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL400ULPD8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!