Altronix AL624E Linear Power S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$160.90
$138.59

Altronix AL624E Linear Power Supply, Input 16VAC to 24VAC, 20VA to 40VA, Single Selectable Output, 6/12VDC at 1.2A or 24VDC at 0.75A, Grey Enclosure

(No reviews yet) Write a Review

Model: AL624E

In Stock (leaves warehouse same day if ordered before 3pm ET)

$160.90
$138.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL624E – Frequently Asked Questions

1) I have to power several doors off one supply. Is a single-output Altronix AL624E the right choice?
No. The AL624E is a single-output unit, so one supply feeds one load. For a multi-door run you want a multi-output board: the RCI DKPS-2A gives eight outputs at 12/24VDC and 2A, and Securitron's AQL4 switching supply runs 12/24VDC at 4/3 amps. If the amp draw is the problem rather than the output count, the SDC 634 Series is a 4 amp regulated supply with dual voltage selection.
2) Can I use a general purpose supply like the Altronix AL624E to run motorized latch retraction exit devices?
Motorized latch retraction pulls a heavy inrush that a general purpose supply is not built for. Use a device-specific unit instead: the BEST RPSMLR2 Series is made for motorized latch retraction exit devices, and for delayed egress hardware the BEST PS161-6 takes 120V in and puts out 12/24V at 6 amps. Keep the AL624E on steady loads like strikes, readers and mag locks.
3) The AL624E only has one output. What do I use if I need to feed several doors from one enclosure?
The AL624E provides a single selectable output, so each additional door needs its own run back to a distribution point. For multiple fused or separately protected outputs from one box, look at the RCI DKPS-2A, which provides 8 outputs at 12/24VDC, 2A, for access control systems. The BEST PS161-6 is another multi-door option with 120V input, 12/24V output and 6A capacity.
4) Will the AL624E run a motorized latch retraction exit device or a delayed egress device?
Those applications call for a purpose-built supply rather than the AL624E, which gives 1.2A at 12VDC or 0.75A at 24VDC on one output. Motor latch retraction draws a high inrush and is served by the BEST RPSMLR2 Series power supply built for motorized latch retraction exit devices. Delayed egress hardware is served by the BEST PS161-6, a 120V input, 12/24V output supply with 6A capacity for delayed egress exit devices. The BEST ELR150 Series is the control module option for electric latch retraction and access control tie-in.
5) I just need a small plug-in supply for one electric strike with a timer. Is an enclosed unit like the AL624E overkill?
Probably, yes. If it is one strike on a buzzer circuit, the ROFU 9126T is a plug-in mini supply at 12VDC and 1.5A with a built-in time delay, which saves you mounting an enclosure. Step up to an enclosed supply like the AL624E when the install needs to be permanent, hardwired and serviceable in a box.
6) Does the AL624E include battery backup, and what should I specify if standby power is required?
The AL624E is described as a linear supply with a single selectable output and grey enclosure, with no standby battery function stated. If the opening has to stay powered through a utility outage, specify a unit that carries backup explicitly: the Adams Rite PS-1, 1 amp 12/24VDC with battery backup; the Command Access PS204/204B, 2A at 24VDC with battery backup; or the Detex 10-800 Series universal logic controller with 120VAC/24VDC power supply and battery backup where you also need door logic.
7) If my hardware is 24VDC only, is there a simpler alternative to the selectable AL624E?
Yes. The AL624E's selectable output is useful when a site mixes 6, 12 and 24VDC devices, but a fixed 24VDC job does not need that flexibility. The Command Access PS1 Series is a 24VDC linear power supply with 1 amp output, and the Command Access PS210 is a UL 6E/CSA linear supply rated 1.5A at 24VDC with boost circuitry. Both are dedicated 24VDC units, which removes the chance of a selector being set wrong in the field.
8) Is the ROFU 10305-LA a substitute for the AL624E?
No, they do different jobs. The AL624E is a power supply that converts 16VAC to 24VAC input into a selectable 6/12VDC or 24VDC output. The ROFU 10305-LA/10306-LA is a tamper resistant power transfer hinge rated 1.5A at 42V in a plastic white finish, which carries power from the frame across to the door leaf. A typical electrified opening uses both: a supply for the power, and a transfer device to get it into the door. Similarly, the Command Access CAT Field Tester is a portable 12-24VDC tester that runs on DeWalt, Makita and Milwaukee batteries, meant for bench and field checks rather than permanent installation.
9) How does the AL624E compare with the SDC 631 and the ROFU 9102?
All three are low voltage DC supplies for access control. The AL624E is a linear unit taking 16VAC to 24VAC at 20VA to 40VA and giving one selectable output of 6/12VDC at 1.2A or 24VDC at 0.75A in a grey enclosure. The SDC 631 Series is a 1.5 amp regulated and filtered DC power controller with dual voltage selection, so it adds controller functions alongside the supply. The ROFU 9102 is offered as 9102-12D UL and 9102-24D, taking 10/120VAC 60Hz input, meaning the voltage is fixed by model rather than selected in the field.
10) Is the Altronix AL624E power supply meant for commercial access control work or light residential use?
The AL624E is a commercial-duty unit. Altronix builds it for professional security and access control installations, so it belongs on card reader, mag lock and electric strike circuits in commercial buildings rather than in a homeowner-grade doorbell or intercom job.
How fast can I get the Altronix AL624E delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL624E come with a warranty?
Absolutely. The Altronix AL624E is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL624E?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL624E from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.