Altronix SMP10PM24P16 Supervis...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$619.02
$477.05
Altronix SMP10PM24P16 Supervised Power Supply/Charger, 115VAC 60Hz at 1.45A Input, 16 Fuse Protected 24VDC at 3.5A Outputs, 10A Max Output, Grey Enclosure

Altronix SMP10PM24P16 Supervised Power Supply/Charger, 115VAC 60Hz at 1.45A Input, 16 Fuse Protected 24VDC at 3.5A Outputs, 10A Max Output, Grey Enclosure

(No reviews yet) Write a Review

Model: SMP10PM24P16

In Stock (leaves warehouse same day if ordered before 3pm ET)

$619.02
$477.05
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
10A
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix SMP10PM24P16 – Frequently Asked Questions

1) How much total DC current does the Altronix SMP10PM24P16 power supply deliver?
The SMP10PM24P16 is rated at 10A of total output current, so all the connected devices together have to stay under that ceiling. Size it by adding up the holding current of every mag lock, strike, reader and controller you plan to hang off it, then leave headroom for inrush when several devices release and re-lock at once.
2) What should I use instead of the Altronix SMP10PM24P16 for motorized latch retraction exit devices?
Motorized latch retraction draws a high inrush current and is normally powered from a supply built for that duty. The BEST RPSMLR2 is a power supply made specifically for motorized latch retraction exit devices, and the BEST PS161-6 is intended for delayed egress exit devices with 120V input, 12/24V output and 6A capacity. The Altronix SMP10PM24P16 is a general 24VDC supervised power supply/charger with 16 fuse protected outputs at 10A maximum, used to distribute power across many access control devices rather than to drive a specific exit device motor.
3) What is the closest alternative to the Altronix SMP10PM24P16 if I need a 10 amp power supply but only 12VDC devices?
The Altronix SMP10PM24P16 is a 24VDC supervised power supply/charger rated 10A maximum output across 16 fuse protected outputs. If the devices on the job run at 12VDC, the Securitron AQS1210 is a switching power supply rated 12 VDC at 10 Amp, matching the current capacity at the lower voltage. The AQS1210 is a single-voltage 12VDC unit, while the SMP10PM24P16 distributes its 24VDC capacity across sixteen individually fused outputs.
4) Can I run the Altronix SMP10PM24P16 off standard building power?
Yes. It runs on 120V line power, which is a standard dedicated 120VAC branch circuit in a commercial building. It is an enclosed unit meant to be hardwired by an electrician or low voltage contractor, not a plug-in transformer you drop behind a desk.
5) Is the Altronix SMP10PM24P16 suitable for a commercial access control system or is it a residential unit?
It is a commercial-duty unit, built as an access power controller with an integral power supply. That is the category you want when you are feeding multiple openings from one enclosure in an office building, school or multi-family property, rather than powering a single door.
6) What else could I buy if I need a multi-output access control power supply instead of the Altronix SMP10PM24P16?
The closest multi-output alternative in the same family of products is the RCI DKPS-2A, which gives you eight outputs at 12 or 24VDC and 2A. It is a far smaller power budget than a 10A unit, so it suits a handful of low-draw strikes rather than a full bank of mag locks. For a larger distributed system, the Locknetics LP Series supply ships with its own enclosure.
7) What are the single-door alternatives to the Altronix SMP10PM24P16 for one electrified lock?
For a single opening, the SDC 620 Series is a 1 amp regulated and filtered low voltage supply with dual voltage selection, the SDC 631 Series is a 1.5 amp regulated DC power controller with dual voltage selection, and the Command Access PS1 Series is a 24VDC linear supply with 1 amp output. The Altronix SMP10PM24P16 is a supervised 24VDC unit with 16 fuse protected outputs and 10A maximum, sized for a full system rather than one lock.
8) Do I need a separate power supply for delayed egress hardware, or can I use one access control supply for everything?
Delayed egress devices are typically fed from a supply listed for that application, like the BEST PS161-6, which takes 120V in and gives 12/24V out at 6A. Life safety hardware is usually kept on its own supply so a fault on the general access control side cannot take the egress devices down.
How fast can I get the Altronix SMP10PM24P16 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix SMP10PM24P16 come with a warranty?
Absolutely. The Altronix SMP10PM24P16 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix SMP10PM24P16?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix SMP10PM24P16 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!