Altronix SMP7PMCTX Supervised ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$470.67
$362.72
Altronix SMP7PMCTX Supervised Power Supply/Charger, 115VAC 60Hz at 2.5A Input, 12/24VDC at 6A Output, Grey Enclosure

Altronix SMP7PMCTX Supervised Power Supply/Charger, 115VAC 60Hz at 2.5A Input, 12/24VDC at 6A Output, Grey Enclosure

(No reviews yet) Write a Review

Model: SMP7PMCTX

In Stock (leaves warehouse same day if ordered before 3pm ET)

$470.67
$362.72
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
6A
Features:
Converts a 115VAC / 60Hz Input into a Regulated 12VDC or 24VDC Output @ 6A Continuous Supply Current
Includes:
Includes Enclosure, Charger, Single Output
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix SMP7PMCTX – Frequently Asked Questions

1) Does the Altronix SMP7PMCTX put out 12VDC or 24VDC?
Both, one at a time. The SMP7PMCTX takes a 115VAC 60Hz input and converts it to a regulated 12VDC or 24VDC output at 6A continuous. You pick the voltage at the board, so one part number covers a 12V mag lock run or a 24V electric strike or exit device run, but not both off the same supply at once.
2) Does the Altronix SMP7PMCTX come with an enclosure, or do I need to buy one?
The enclosure is included, along with the battery charger circuit and a single output. It ships in a grey enclosure, so you are mounting a finished boxed unit rather than an open board. Standby batteries themselves are a separate purchase.
3) Does the SMP7PMCTX support battery backup for access control doors?
It does. The SMP7PMCTX is a power supply/charger, meaning the charging circuit for standby batteries is built in, so the unit keeps a battery set topped up and carries the load when line power drops. That matters on fail secure electric strikes and on any opening where the access control has to keep working through an outage. The batteries are not part of the unit.
4) I need one power supply feeding several doors from separate outputs. Is the SMP7PMCTX the right choice?
Not if you need the distribution built in. The SMP7PMCTX is a single output unit, so multiple doors either share that output through a separate distribution board or you pick a multi-output supply. The RCI DKPS-2A gives eight outputs at 12/24VDC at 2A, which suits several low-draw openings; for a higher current 12/24V unit in the same class as this one, the BEST PS161-6 is a 120V input, 12/24V output supply with 6A capacity.
5) Will the Altronix SMP7PMCTX run motorized latch retraction exit devices?
Motorized latch retraction draws a heavy inrush and is normally fed by a supply built for it. The BEST RPSMLR2 is a power supply specifically for motorized latch retraction exit devices, and the BEST PS161-6 is specified for delayed egress exit devices at 120V input and 12/24V output with 6A capacity. The SMP7PMCTX is a general supervised power supply/charger rated 12/24VDC at 6A - confirm the exit device manufacturer's inrush requirement before substituting it for a purpose-built MLR supply.
6) What is the closest equivalent to the Altronix SMP7PMCTX from another brand at the same output rating?
The BEST PS161-6 is the nearest match on the core electrical numbers: it takes a 120V input and delivers 12/24V output at 6A capacity, the same 12/24VDC at 6A the SMP7PMCTX supplies from a 115VAC 60Hz input. The BEST unit is described for delayed egress exit devices, while the Altronix is a supervised power supply/charger supplied with an enclosure and battery charger. If the job is simply powering a 6A 12 or 24VDC load, either one covers the current draw.
7) I only need to power one maglock or strike - is there a smaller alternative to the Altronix SMP7PMCTX?
Yes. The SMP7PMCTX is a 6A supply, which is more capacity than a single device needs. For a single opening, the Securitron AQD1 is a 12/24 VDC 1 Amp switching supply, the SDC 620 Series is a 1 Amp regulated and filtered low voltage supply with dual voltage selection, and the Command Access PS1 is a 24VDC linear supply with 1 Amp output. The Von Duprin PS902 base power supply gives 2A at 12/24 VDC field selectable if you want a little headroom for a second device.
8) How many door devices can a 6 amp access control power supply run?
Size it by the sum of the holding or actuating current of everything on it. The SMP7PMCTX gives 6A continuous at 12VDC or 24VDC, which is a lot of capacity for a small to mid size opening count, but the real limit is your device draw plus any inrush from latch retraction or motorized hardware. Total your device amp draws at the voltage you have selected and keep them under 6A.
9) What input power do I need to run at the panel location for this Altronix supply?
A standard 115VAC 60Hz circuit, listed at 120V. Plan a dedicated unswitched branch circuit to the enclosure location, since the whole point of a charger-equipped supply is that it stays energized and keeps the standby battery maintained.
10) What is a lower capacity alternative if 6 amps is more supply than my job needs?
For a single opening or a couple of low-draw devices, smaller 12/24V units cover it: the Securitron AQD1 is a 12/24VDC 1 amp switching supply, the Adams Rite PS-1 is a 1 amp 12/24VDC regulated supply with battery backup, and the Von Duprin PS902 is a 2A 12/24VDC field selectable base supply. Step up to the Securitron AQL4 at 4/3 amp or the SDC 634 at 4 amps if you are closer to the middle of the range.
11) I need multiple fused outputs to feed several doors - how does the Altronix SMP7PMCTX compare to the RCI DKPS-2A?
The RCI DKPS-2A is built around distribution: 8 outputs at 12/24VDC, but the whole supply is rated 2A, so those eight outputs share a 2 amp budget. The Altronix SMP7PMCTX delivers 12/24VDC at 6A continuous supply current with an enclosure and charger included. For a handful of low-draw strikes the DKPS-2A distributes cleanly; for maglocks or motorized devices that pull real current, the 6A rating is the deciding difference.
12) Which items look like alternatives to the Altronix SMP7PMCTX but are not actually power supplies for a door system?
Two to watch. The Command Access CAT Field Tester is a portable 12-24VDC tester that runs off DeWalt, Makita and Milwaukee batteries - a bench and troubleshooting tool, not a permanent supply. The ROFU 10305-LA/10306-LA is a power transfer hinge rated 1.5A at 42V, which carries power through the door edge rather than generating it. The Detex 10-800 is a universal logic controller that happens to include a 120VAC/24VDC supply with battery backup, so it is a controller first. The SMP7PMCTX is a supervised power supply/charger supplied with enclosure and charger.
13) I need battery backup with the power supply - which alternatives to the Altronix SMP7PMCTX include it?
The SMP7PMCTX is a power supply/charger, meaning the charging circuit for standby batteries is part of the unit. If you need a smaller supply with the same backup capability, the Adams Rite PS-1 is a 1 amp 12/24 volt DC regulated supply with battery backup, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Detex 10-800 includes a 120VAC/24VDC supply with battery backup built into a logic controller.
14) Is this Altronix power supply rated for commercial buildings or just residential use?
Commercial. The SMP7PMCTX is a supervised power supply/charger built for professional security and access control work, catalogued for commercial use with access power controller applications in mind.
How fast can I get the Altronix SMP7PMCTX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix SMP7PMCTX come with a warranty?
Absolutely. The Altronix SMP7PMCTX is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix SMP7PMCTX?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix SMP7PMCTX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!