You may also like
0.5 gpm/1.9 L/min Pressure-Compensating Non-Aerated Spray
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Showerheads
- Product Type:
- Non-Aerated Spray
- Department:
- Plumbing
- Country of Origin:
- United States
- Product Color:
- Chrome
American Standard M922903-0020A – Frequently Asked Questions
1) What flow rate does the American Standard M922903 spray head deliver?
It is a 0.5 gpm (1.9 L/min) spray. That is well below the 2.5 gpm federal maximum and below the 1.8 gpm level common in water-conservation retrofits, so it is aimed at facilities pushing hard on water use, like schools, dorms, and correctional or institutional washrooms.
2) What does pressure-compensating mean on a 0.5 gpm shower spray, and why does it matter in a multi-story building?
Pressure compensating means the spray holds its rated 0.5 gpm output across a range of supply pressures instead of gushing on a high-pressure line and dribbling on a low one. In a multi-story or multi-family building where pressure varies floor to floor, that keeps the spray performance and the water budget consistent at every fixture rather than tuning each one.
3) Is the American Standard M922903 an aerated or non-aerated spray?
Non-aerated. It does not mix air into the stream, so the water leaves as discrete droplets rather than an aerated mist. Non-aerated sprays hold heat better over the distance from head to body, which is why they are often specified at very low flow rates where an aerated stream would feel cool.
4) Will a 0.5 gpm spray head be too weak for a hotel or apartment shower?
Be honest with yourself about the application. At 0.5 gpm this is the lowest tier of low-flow, and it is specified where water and energy savings outrank shower feel: dorms, correctional facilities, day-use and staff showers. For guest-facing hospitality or market-rate apartments, buyers typically go to a 1.5 to 1.8 gpm head instead. The pressure-compensating design keeps this one consistent, but it cannot make 0.5 gpm feel like 2.0.
5) What finish does American Standard M922903-0020A come in?
Chrome is the finish, ordered as part number M922903-0020A. Chrome is the standard choice for institutional and multi-family washrooms because it matches most existing valve trim and holds up to routine cleaning chemicals.
How fast can I get the American Standard M922903-0020A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard M922903-0020A come with a warranty?
Absolutely. The American Standard M922903-0020A is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard M922903-0020A?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard M922903-0020A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.