American Standard 60 x 76-Inch Height Semi-Frameless Top-Roller Sliding Shower Door - AMS-AM00811400

It fits a finished opening of 56 to 60 inches (1422 to 1524 mm). Measure the opening at the threshold, at mid-height, and at the top, then use the narrowest reading. Overall height of the unit is 76 inches (1930 mm).

The threshold needs to be at least 2-3/4 inches (70 mm) wide. A bypass door runs two panels on separate tracks, so the curb has to carry the full track width. If your curb is narrower than that, this door is the wrong choice and you want a single-panel pivot or a frameless swing door instead.

There is some adjustment built in, and it can be made while the door is hanging: 5/16 inch (8 mm) for out-of-plumb and 3/16 inch (5 mm) for level. That covers typical tile and framing tolerance in a remodel. Walls out more than 5/16 inch over the 76 inch height will need shimming or wall correction before the door goes in.

That is the common application. A standard 60 inch alcove tub gives a finished opening in the 56 to 60 inch range this door covers, and the 76 inch height suits a tub-to-ceiling tiled surround. What decides it is the tub deck: you need 2-3/4 inches of flat width for the bottom track. Many older tubs with a rolled or narrow rim will not give you that.

Two: Brushed Nickel (AM00811400.006) and Silver Shine (AM00811400.213). Silver Shine reads as a bright polished-chrome-look aluminum, brushed nickel as a warmer satin. For a property manager matching existing valves and towel bars across units, those are the two options to pick from.

Semi-frameless means the glass panels have no vertical or bottom frame around each edge; there is a metal header at the top carrying the rollers, plus wall jambs. The rollers are visible by design. A fully framed door wraps every edge in aluminum and hides the hardware, which is easier on out-of-square openings but collects more soap film. A fully frameless door drops the header entirely and hangs on bottom rollers or hinges. This one sits between the two.

It is a top-roller design: the panels hang from rollers riding in the metal header. Nothing rolls in the bottom track, so grit and soap scum have nowhere to bind, and there is no bottom wheel to replace. It also means the header has to be mounted level and solidly anchored to the walls, since it carries the entire weight of both 3/8 inch glass panels.

The glass carries an easy-to-clean coating that helps it stay cleaner longer between wipe-downs. Treat it as a maintenance aid, not a permanent finish: skip abrasive pads and ammonia cleaners, which strip glass coatings. For a rental or hotel turnover schedule, a squeegee after use still does most of the work.