You may also like
Axis Neo Angle Shower Door Bottom Gasket
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Shower Doors
- Product Type:
- Door Bottom Gasket
- Department:
- Plumbing
American Standard 710368-101.0070A – Frequently Asked Questions
1) What is American Standard part 710368-101 used for on a shower door?
It's the bottom gasket (sweep) for an American Standard Axis neo angle shower door. The gasket runs along the bottom edge of the glass door panel and seals the gap between the door and the shower base so water stays inside the enclosure. It's a replacement part, not a complete door or a threshold.
2) Will the Axis bottom gasket fit a straight or corner sliding shower door?
No. This sweep is made for the American Standard Axis neo angle door, which is the angled three-panel corner configuration. Gasket profiles are cut to the specific door series and glass thickness, so a sweep from a neo angle door should not be substituted onto a sliding, bypass, or straight pivot enclosure. Match the gasket to the Axis neo angle model you actually have.
3) My shower is leaking at the floor. Do I need a new door or just the bottom sweep?
If water is escaping under the door and the glass, hinges, and frame are sound, replacing the bottom gasket is usually all that's needed. The sweep is the wear part, it hardens, tears, and loses its seal to the base long before the door itself fails. For an American Standard Axis neo angle enclosure, the 710368-101 sweep is the direct replacement for that bottom seal.
4) Does the Axis shower door bottom gasket come in different finishes to match my hardware?
It ships one way only, with no finish applied. The sweep is the clear or uncolored vinyl seal that sits against the shower base, so it isn't finished to match chrome, brushed nickel, or bronze trim the way hinges and handles are. There is a single orderable version, part number 710368-101.0070A.
5) Is any hardware or adhesive needed to install the Axis door bottom sweep?
Shower door bottom gaskets of this type slide onto the bottom edge of the glass panel and hold by friction, so no fasteners or adhesive are part of the part itself. Plan on removing the old sweep and cutting the new one to the width of your door panel during fitting. Only the gasket is supplied, no glass, hinges, or track.
How fast can I get the American Standard 710368-101.0070A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 710368-101.0070A come with a warranty?
Absolutely. The American Standard 710368-101.0070A is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 710368-101.0070A?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 710368-101.0070A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.