Braymer One-Handle Bathroom Faucet
- Lustrous finish - Tarnish-, scratch- and corrosion-resistant durability
- Drip-free - Quality ceramic disc valve ensures a lifetime of drip-free performance
- Push-pop drain – Practical design allows for quick removal of clogs
- WaterSense certified - Uses 1.2 gallons per minute, saving water without sacrificing performance
- Includes - Supply lines and optional deck plate
- ADA compliant - Meets requirements of the Americans with Disabilities Act
- Limited Lifetime Warranty
Manufacturer Resources
Product Specs
- Product Type:
- Bath Faucet
- Product Group:
- Commercial
- Product Subgroup:
- Faucets
- Department:
- Plumbing
American Standard 7427101.002 – Frequently Asked Questions
1) Can the American Standard Braymer bathroom faucet be installed on a 3-hole sink, or is it single-hole only?
Both. The Braymer is a one-handle faucet that mounts in a single hole, and it ships with an optional deck plate so it can cover a 3-hole basin instead. That means you can drop it into an existing 3-hole lavatory without swapping the sink or the countertop, or leave the deck plate off for a clean single-hole look.
2) Does the Braymer faucet come with a drain, or do I need to order one separately?
A push-pop drain is part of the faucet, so you are not buying a lift rod assembly or a separate pop-up on the side. Push-pop means there is no lift rod through the faucet body at all; you press the stopper to open and close it, and it lifts straight out to clear hair and debris, which is the reason maintenance crews tend to prefer it in multi-family and hospitality units.
3) What kind of valve is in the Braymer faucet, and will it hold up in a commercial restroom?
It uses a ceramic disc cartridge. Ceramic disc is the standard for commercial lavatory duty because the sealing surfaces are two polished ceramic plates rather than a rubber washer, so they do not wear into a drip the way compression stems do and they tolerate hard water and grit better. For a property manager running dozens of identical openings, that is the spec that keeps the drip calls down.
4) What flow rate does the American Standard Braymer bathroom faucet run at?
1.2 gallons per minute, and it is WaterSense certified at that rate. That matters on two fronts: WaterSense lavatory faucets max out at 1.5 gpm, so 1.2 gpm clears it with margin, and it is the flow rate most green building and water-conservation specs are written around for public lavatories.
5) Are supply lines included with the American Standard Braymer faucet or do I need to add them?
Supply lines come in the box. For a straight replacement you would typically still need angle stops if the existing ones are shot, but the flexible connectors from the faucet shanks down to the stops are supplied, so a rough-in count for a multi-unit job does not need a separate line item for them.
6) What finish does the Braymer one-handle bathroom faucet come in?
Chrome, under manufacturer part number 7427101.002. It is the only finish this model is built in, so if you are standardizing a floor of units or matching existing trim, chrome is what you are matching to. American Standard describes the finish as tarnish, scratch, and corrosion resistant, which is the relevant point for a high-traffic public lavatory where the deck gets wiped down with cleaners daily.
7) Should I use a single-handle faucet like the Braymer or a two-handle widespread in an apartment bathroom?
A single-handle like the Braymer sets temperature and volume with one lever, which is why it reads as ADA compliant and why it installs in one hole (or three with the included deck plate). A two-handle widespread needs three separate holes at a fixed spread and gives you no ADA advantage. For rental units, hotel rooms, and public restrooms where you want fast one-hand operation and fewer connection points, the single-handle is the simpler call. Go widespread only when the design spec or an existing 8-inch spread deck demands it.
How fast can I get the American Standard 7427101.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 7427101.002 come with a warranty?
Absolutely. The American Standard 7427101.002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 7427101.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 7427101.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.