Colony PRO 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Grid Drain and Lever Handle
- Long-lasting, durable metal construction
- Easy to install with simple one-person installation
- Available in three beautiful finishes to match all design styles and color palettes
- Memory Position Valving keeps a consistent preferred water temperature without any handle adjustments
- Adjustable hot-limit safety stop helps to prevent accidental scalding
- Ceramic disc valve cartridges provide a lifetime of smooth handle operation and drip-free performance
- Both Hot/Cold (Red/Blue) and Color Matched plug button are included
- 1.2 gallons per minute (1.2 gpm/4.5 L/min) maximum flow rate helps to save water
- Washerless 35 mm ceramic disc valve cartridge with integral hot limit safety stop
Manufacturer Resources
Product Specs
- Product Type:
- Bath Faucet
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Faucets
- Department:
- Plumbing
- Country of Origin:
- Mexico
- Product Color:
- Chrome
- Residential Commercial:
- Residential
- Luxury/Non Luxury:
- Non Luxury
American Standard 7075006.002 – Frequently Asked Questions
1) Will the American Standard Colony PRO 7075006 bathroom faucet fit a sink drilled for 4-inch centers?
Yes. The Colony PRO 7075006 is a 4-inch centerset single-handle faucet, so it mounts on a lavatory or countertop drilled on 4-inch centers. Centerset means the spout and handle sit on one body spanning those two outer holes, so it also covers a standard three-hole 4-inch deck. It will not work on an 8-inch widespread deck.
2) Does the Colony PRO 7075006 faucet come with a drain, or do I have to buy one separately?
A grid drain is included with the 7075006, along with the lever handle. Grid drain means a fixed, non-closing strainer style rather than a pop-up with a lift rod, so there is no lift rod linkage to install or adjust. If the job needs a stopper the buyer can close, this is not the right model.
3) What is the flow rate on the American Standard Colony PRO 7075006, and will it meet a low-flow requirement?
Maximum flow is 1.2 gpm (4.5 L/min). That is the reduced-flow rate commonly specified for commercial and multi-family lavatories where a 2.2 gpm aerator would not pass. For hospitality or institutional standardization, it is the same rate across the run.
4) Can I set a scald limit on this single-handle bathroom faucet?
Yes. The Colony PRO 7075006 uses a 35 mm washerless ceramic disc cartridge with an integral hot-limit safety stop, and that stop is adjustable to cap how far toward hot the lever travels. It also has Memory Position Valving, so the handle returns to the same temperature setting each time it is turned on without readjusting.
5) Is the Colony PRO 7075006 metal or plastic, and is it durable enough for a high-traffic restroom?
Construction is metal, and the valve is a washerless ceramic disc cartridge rather than a rubber washer seat, which is what holds up under repeated daily cycling without dripping. That combination is why this line gets specified for apartment turns and light commercial restrooms.
6) What finish is the American Standard 7075006 bathroom faucet, and what is the exact part number to order?
Ordered as part number 7075006.002, which is the chrome finish. Both hot/cold (red/blue) index buttons and a color-matched plug button ship in the box, so the handle can be finished either way depending on whether the facility wants temperature marking.
7) Can one person install this faucet, or do I need a helper under the sink?
The Colony PRO 7075006 is built for one-person installation, which matters on a turnover schedule where a maintenance tech is working a unit alone. Because it is a centerset body, the deck plate and valve go on as a single assembly rather than three separate pieces set on 8-inch centers.
How fast can I get the American Standard 7075006.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 7075006.002 come with a warranty?
Absolutely. The American Standard 7075006.002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 7075006.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 7075006.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.