American Standard Commercial Shower System Trim Kit 1.5 gpm/5.7gpm with 36" Slide Bar, Hand Shower, Showerhead and Tub Spout - AMS-TU662214

Trim only. The TU662214 is a trim kit, so it supplies the finished parts you see on the wall (showerhead, hand shower, 36 inch slide bar and tub spout) and not the rough-in valve body behind it. If you are building a new wall or gutting an existing one, you need to order the compatible rough-in valve separately. On a replacement job, the existing valve body stays in the wall.

Two rates are published for this kit: 1.5 gpm and 5.7 gpm. The lower figure is the water saving rate that matters where a job has to meet a low flow spec, such as California or a LEED driven multi family or hospitality project. Worth checking against the flow requirement on your plumbing schedule before you commit, since it is the spec most often flagged at inspection.

The slide bar measures 36 inches, which gives a long adjustment range for the hand shower between a seated user and a standing user. That range is why hand shower and slide bar combinations get specified in assisted living, healthcare and hotel accessible rooms. Confirm the mounting height and clear floor requirements against the code your facility is reviewed under, since bar length alone does not settle compliance.

TU662214.002 is the number to quote, with the .002 suffix carrying the chrome finish. The base number TU662214 identifies the trim kit itself. Distributors ordering against a plumbing schedule should confirm the schedule calls out the trim separately from the rough-in valve, because this number covers the trim package only.