American Standard Compact Cadet 3 One-Piece 1.28 gpf/4.8 Lpf Chair Height Right-Hand Trip Lever Elongated Toilet With Seat - AMS-2403813

Yes. The Compact Cadet 3 one-piece uses a Right Height chair-height bowl, which American Standard states is ADA compliant. That seat height is what makes sitting and standing easier for older residents and anyone with mobility limits, so it's the version to spec when a unit or restroom has to meet accessible requirements rather than a standard-height bowl.

It flushes at 1.28 gallons per flush (4.8 Lpf) and is WaterSense certified, using American Standard's FloWise technology. That meets the 1.28 gpf high-efficiency threshold specified on most green building and municipal rebate programs, and it is the same flush volume typically required on new multi-family and hospitality work.

No separate seat purchase. The Compact Cadet 3 one-piece ships with a slow-close seat and lid, so there's no slamming, and the seat has a sanitary lift tab so users don't touch the seat surface directly. You'll still need a supply line and a wax ring or gasket plus closet bolts to set it.

The trip lever is right-hand mounted. Worth checking against the existing fixtures if you're replacing one toilet in a row of units, since a left-hand lever won't match and can collide with an adjacent wall or vanity in a tight bathroom.

This is the compact elongated version of the Cadet 3, so the bowl is shortened front to back compared to a standard elongated fixture while keeping the elongated seat shape. That's the usual answer for a half bath or a tight apartment bathroom where a full elongated bowl crowds the door swing but a round front feels like a downgrade to the tenant.

One-piece construction removes the gap between tank and bowl where dirt and grime collect, so housekeeping wipes it down in one pass and there's no tank-to-bowl gasket to weep years later. The Cadet 3 also carries the EverClean surface, which inhibits growth of stain and odor causing mildew. Two-piece models are easier to carry up stairs and cheaper to replace a single half of, so that trade is worth weighing on high-rise work.

The Cadet 3 flushing system pairs a 2-1/8 inch glazed trapway with an oversized 3 inch flush valve, so the tank dumps fast and moves a large slug of water through a wide passage. That combination is what lets it clear the bowl at 1.28 gpf rather than relying on volume. The glazed trapway also cuts down on the drag that causes clogs at the bend.

White is the finish offered, and the manufacturer part number is 2403813.02. Quote that number when matching additional fixtures across a building so every unit gets the same bowl shape, height, and lever side.