American Standard Comrade Wall-Hung Sink With 4-Inch Centerset, Wall Hanger Included - AMS-124024

Yes. The Comrade wall-hung sink is drilled for faucet holes on 4 inch (102 mm) centers, so a standard 4 inch centerset faucet mounts directly. A widespread 8 inch faucet will not fit this drilling, and a single-hole faucet would leave the outer two holes open unless you cover them with an escutcheon plate.

The wall hanger is included with the Comrade wall-hung sink. You still need to provide blocking or a suitable backing in the wall to carry the load, plus the faucet, supplies, P-trap and drain, which are separate items.

It is made of vitreous china, the standard glazed ceramic body used in commercial and multi-family washrooms. The glazed surface cleans with ordinary washroom chemicals and resists staining, and the wall-hung mounting leaves the floor clear underneath for mopping, which is why property managers spec this style for high-traffic restrooms.

Yes, it has a rear overflow. That means you can use a standard pop-up drain assembly with overflow ports rather than a grid drain, which is what you would need on an overflow-less basin.

Plan on a 4 inch centerset faucet, a drain assembly suited to a basin with an overflow, a P-trap and tailpiece, and angle stops with supply risers. The wall hanger for mounting is supplied with the sink. On an exposed wall-hung installation you may also want trap and supply insulation covers, which are ordered separately.

A wall-hung basin like the Comrade carries its whole load on a wall hanger, so the floor stays open and the supplies and trap are exposed. Pick it where you want clear floor for cleaning or knee clearance underneath, and where the wall can take blocking. Choose a pedestal or vanity instead if you want the plumbing hidden or the wall framing cannot be opened up for backing.

White only. The Comrade wall-hung sink is sold as model 124024.02 in white, so it matches standard white china fixtures already in most restrooms.

Both. The basin is formed with a soap depression and a faucet ledge behind the bowl, so the faucet body sits on the ledge instead of on the rim and there is a molded spot for bar soap without adding a separate dish.