American Standard Contemporary Round Freestanding Bathtub Filler With Lever Handle Faucet for Flash Rough-In Valve - AMS-T064951

The trim only. The T064951 is a freestanding tub filler designed to install on American Standard's Flash rough-in valve platform, so the rough valve is a separate purchase and has to be set in the floor before the finish work goes on. Plan the rough-in with the Flash valve in hand; the trim will not mount to an unrelated rough.

It is a freestanding floor-mount filler, meant to stand beside a freestanding tub rather than mount through a deck or a tub rim. That means the supply rough has to come up through the floor at the valve location, not through the tub itself.

Yes. A metal single function personal shower is part of the package, on a 59 inch metal hose, with an easy-clean spray face. The holder bracket pivots 60 degrees so you can aim it down into the tub or out toward someone standing.

It ships with double check valves built in to prevent back flow, which is the usual inspector concern with any hand shower that can reach below the tub rim. No separate vacuum breaker kit is part of this trim.

The body is metal construction rather than plastic, and the handheld and hose are metal as well, which is what holds up to daily use and prolonged water contact. Control is a 35 mm washerless 1/4 turn ceramic disc cartridge, the same style of cartridge maintenance crews are used to swapping rather than rebuilding. For a property standardizing across units, the four finish codes let you keep one model across the whole fleet.

Maximum flow is 1.8 gpm (6.8 L/min). That is the figure to put on a submittal where a project is tracking water use.

Lever handle, with a contemporary round column. Levers are the easier grip for wet hands and for anyone with limited hand strength, which is why they get specified in accessible and senior-housing bathrooms.