American Standard Euro 60 x 70-Inch Height Semi-Frameless Sliding Shower Door with Rain Glass - AMS-AM00390422

Yes, within limits. The Euro door has a simple out-of-square adjustment built into the side jambs, so you can plumb the door against walls that lean slightly, which is typical in remodels and older tile work. The opening still has to fall between 56 and 60 inches, and the curb has to be level enough for the bottom track to seat and seal. Badly bowed walls or a curb pitched the wrong way still need to be corrected before the enclosure goes in.

A standard alcove tub is 60 inches, and this door covers 56 to 60 inch openings, so the width works. The deciding factor is height: the unit is 70 inches tall overall and needs that clearance measured from the surface it lands on. Over a tub deck that puts the header roughly 70 inches above the tub rim, so confirm the tile or wall surround runs high enough and that there is no ceiling, light, or window trim in that band.

Two: Brushed Nickel (AM00390422.006) and Silver Shine (AM00390422.213). Silver Shine is the bright polished look that matches chrome trim; Brushed Nickel is the satin finish that pairs with brushed nickel valves and showerheads. For a property manager standardizing bathrooms across units, pick the one that matches the existing shower valve trim, since the header and side jambs are the most visible metal in the enclosure.

Overall height is 70 inches (1778 mm). That is the height of the assembled door including the header, so you need at least 70 inches of clear, plumb wall above the curb or threshold on both sides to land the side jambs and the header. Alcoves with a sloped ceiling or a soffit dropping into that band won't take it.

For a 56 to 60 inch alcove, a bypass slider like the Euro is usually the call. It runs on rollers inside the header and never swings out, so it works in bathrooms where a vanity, toilet, or door swing sits within arm's reach of the shower. A pivot or hinged door needs clear floor space in front and is generally used on smaller openings or neo-angle corners. The tradeoff with a slider is that you can only ever open half the opening at a time, which matters if you need a wide entry for a shower seat or assisted bathing.

Semi-frameless means the glass panels have no frame around their vertical or bottom edges. What you do see is the rounded heavy-duty header at the top, the side jambs at the walls, the bottom track, and tubular pull bars that pass through the glass. It gives most of the open look of a frameless enclosure without the cost and wall-blocking reinforcement that a true frameless heavy glass door needs.

It uses an open bottom track, which is the design that lets you wipe straight through rather than digging soap scum out of a closed U channel. That matters on rentals, hotels, and any high-traffic bathroom where housekeeping turns the unit over quickly. It is still a track, so it sits on the curb and is not a zero-threshold entry.