American Standard Evolution 60 x 32-Inch Deep Soak Integral Apron Bathtub - AMS-2425V-RHO002

The drain is a separate order. The Evolution Deep Soak apron tub requires the American Standard Deep Soak Max Drain, which is not packed with the tub. Budget it as a line item on the order or the tub arrives with no way to finish the rough-in.

The nominal size is 60 by 32 inches, which is the standard alcove footprint, but the actual outside dimensions run 62.75 inches long by 34.75 inches wide. That extra length and width is the tile flange and apron overhang, so measure stud-to-stud, not finished wall to finished wall, before you commit. Height is 25.5 inches overall against a nominal 21-1/2 inch depth.

Right-hand drain. The RHO in 2425V-RHO002 designates the right-hand outlet, so stand at the tub facing it from the room: the waste and overflow rough-in goes at the right end. If your supply and waste are stubbed at the left, this is the wrong part number for that opening.

No. The apron is molded as part of the tub body, so it finishes the exposed side by itself. It also carries a removable access panel, which matters if the waste and overflow needs to be reachable after the wall is closed up.

Three sides carry an integral tile and water retention flange, which covers a standard three-wall alcove. If your opening is a peninsula or corner install with only one or two walls, the exposed flange has to be dealt with in the finish detail.

White only, sold as 2425V-RHO002.020. If you are standardizing fixtures across a building, that single finish is the whole range, so the tub will match unit to unit without a color code to track.

Dual armrests are molded into the shell, paired with the Deep Soak interior at 21-1/2 inches nominal depth. That depth is the point of the Evolution Deep Soak: more water above the overflow than a conventional alcove tub, which is worth knowing if you are replacing a shallow builder tub and want the soak to feel different.