American Standard Handle Kit F/ Grean Tea C-Set - AMS-M916570

It's a replacement trip lever handle kit for an American Standard Green Tea close-coupled toilet. The kit covers the flush handle assembly only, not the tank, fill valve, or flush valve.

It's specified for the Green Tea close-coupled toilet. American Standard trip levers vary by tank in lever length, mounting hole location, and left or right side mount, so a kit called out for one model isn't a blanket fit across the line. Match the kit to the Green Tea tank you're working on, and for other models order the trip lever called out for that tank.

Yes. The M916570 handle kit is the flush handle replacement for the Green Tea close-coupled toilet, and buying it in quantity is how property managers standardize repairs across identical fixtures. Chrome is the single finish, so every unit looks the same on the wall of tanks.

Probably not the handle. A weak flush after a lever swap usually means chain slack, the chain hooked in the wrong hole on the lever arm, or a tired flapper. The M916570 kit replaces the handle and lever only, so if the flush volume was already poor before the handle broke, look at the flush valve and flapper instead.

A trip lever swap is a hand job in most cases: shut the supply, flush the tank down, unhook the chain from the lever arm, back off the retaining nut inside the tank (it's usually reverse thread), pull the old handle out, and reverse the process. The kit is the handle assembly, so you're reusing your existing flapper chain unless it's worn.