American Standard Monterrey 8-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$315.53
$265.53
American Standard Monterrey 8-inch Widespread Gooseneck Faucet With Wrist Blade Handles 1.5 gpm/5.7 Lpm Laminar Flow in Spout Base - AMS-6540180

American Standard Monterrey 8-inch Widespread Gooseneck Faucet With Wrist Blade Handles 1.5 gpm/5.7 Lpm Laminar Flow in Spout Base - AMS-6540180

(No reviews yet) Write a Review

Model: 6540180.002
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$315.53
$265.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Monterrey 8-inch Widespread Gooseneck Faucet With Wrist Blade Handles 1.5 gpm/5.7 Lpm Laminar Flow in Spout Base
  • Laminar flow control in spout base. Plain spout end
  • Field-convertible rigid/swivel gooseneck spout with 5" (127 mm) reach
  • Cast brass valve bodies with 8-inch rigid copper connections
  • 1/2-inch (13 mm) male threaded inlet shanks with brass coupling nuts
  • Washerless ceramic disc valves assure drip-free performance
  • Vandal-resistant wrist blade handles with red and blue indicators
  • 1.5 gpm/5.7 Lpm pressure-compensating flow regulator

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Gooseneck Faucet
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Parts and Accessories
Department:
Plumbing
Parts and Accessories Type:
Faucet
Application:
Faucet
Product Color:
Chrome
Country of Origin:
Mexico

American Standard 6540180.002 – Frequently Asked Questions

1) Will the American Standard Monterrey 6540180 gooseneck faucet fit a standard 8-inch widespread three-hole sink?
Yes. The Monterrey 6540180 is an 8-inch widespread faucet, so it mounts on the common three-hole deck with handles 8 inches apart on center and the gooseneck spout in the center hole. The valve bodies come with 8-inch rigid copper connections joining them to the spout.
2) How much does the Monterrey gooseneck spout reach out over the basin, and does it swivel?
The gooseneck spout has a 5 inch (127 mm) reach and is field-convertible between rigid and swivel, so you can set it fixed over a single bowl or let it swing between bowls on a multi-station sink. No parts swap is needed, it converts in the field.
3) What supply connections do I need for the American Standard 6540180 faucet?
The inlet shanks are 1/2 inch (13 mm) male threaded with brass coupling nuts supplied, so it lands on standard 1/2 inch supply stops and risers. Nothing exotic on the rough-in, but plan for a plain supply tie-in under each valve body rather than flexible tailpieces built into the faucet.
4) Is this faucet suitable for a healthcare or school handwashing sink?
That is the use it is built for. The wrist blade handles let staff operate it with a forearm instead of a hand, they are vandal resistant, and the red and blue indicators mark hot and cold. The laminar flow control sits in the spout base with a plain spout end, meaning no aerator screen to trap debris.
5) What is the flow rate on the Monterrey wrist blade faucet, and does it hold steady with pressure swings?
It runs 1.5 gpm (5.7 Lpm) through a pressure-compensating flow regulator, so the output stays near that figure as building pressure varies across floors or as other fixtures draw.
6) Why a plain spout end with laminar flow instead of an aerator on this faucet?
Laminar flow control is moved back into the spout base and the spout end is left plain. That gives a clear non-aerated stream and removes the screened aerator tip at the outlet, which is the part maintenance normally has to pull and clean on a public washroom faucet.
7) Will these handles drip after heavy public use?
The Monterrey uses washerless ceramic disc valve cartridges in cast brass valve bodies, so there is no rubber washer to wear out and cause the slow drip you get from compression stems on high-traffic sinks.
8) What finish does the American Standard 6540180 come in, and what is the part number to order?
It is offered in chrome, ordered as American Standard part number 6540180.002. One finish, so any standardization across a building's washrooms will be on polished chrome.
How fast can I get the American Standard 6540180.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 6540180.002 come with a warranty?
Absolutely. The American Standard 6540180.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 6540180.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 6540180.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!