American Standard Pekoe 35-Inch Combination Bowl Kitchen Sink Grid - AMS-7302298-401

It is made specifically for the Pekoe 35-inch combination bowl kitchen sink. Because the grid is sized to that basin, it won't seat correctly in a different sink model or a different Pekoe size. Match the sink first, then order the grid.

You get two grids in the set, which is what a combination bowl sink needs: the large bowl and the smaller bowl each get their own grid. Order one set per sink, not two.

The Pekoe grid is built to prevent that. It sits on rubber feet with rubber side bumpers, so the stainless steel never rides directly on the basin floor or against the sidewalls. That is the whole point of a bottom grid in a rental or commercial kitchen: pots and cast iron land on the grid instead of the sink.

It's the bottom grid only, a set of two stainless grids with rubber feet and bumpers. Strainers, drain assemblies, and the sink itself are separate line items.

Stainless steel construction, same family of material as the sink it drops into, so it holds up to constant wet use and standard dish detergent without the corrosion you get from coated wire grids once the coating chips.

For multi-family or hospitality turnovers it's the cheap part that protects the expensive one. The Pekoe grid keeps cookware off the basin floor with rubber feet and bumpers, which slows the scratching and dulling that drives early sink replacement. If your units already run the Pekoe 35-inch combination bowl sink, one two-piece grid set per kitchen covers both bowls.

No finish selection is involved. The grid ships as bare stainless steel under a single part number, 7302298-401.0750A, so there is nothing to specify beyond quantity.