American Standard Princeton PRO Steel 60 x 30-inch Integral Apron Bathtub with Right-Hand Outlet - AMS-1391202

Right-hand outlet. Stand at the front of the tub facing it: the drain and overflow end is on your right, so the supply rough-in has to land on that wall. If the plumbing in your alcove comes up on the left, this one won't work without moving the waste line.

It's a 60 x 30 inch integral apron tub, so it drops into the standard three-wall alcove opening. The apron is part of the tub, meaning no separate skirt or framing face to build, and the integral flange runs on three sides for the tile to lap over.

No. The Princeton PRO comes with leveling support built in, and American Standard states no mortar is required. That takes a step out of the install for a contractor working a tight turnaround, and it's why this tub sets faster than a cast iron or a thin acrylic that needs a full mud bed.

Installation hardware for the integral three-sided tile flange ships with the tub. What is not included is the waste and overflow assembly or the tub filler and valve trim, so order the drain kit and the shower trim separately to finish the job.

That's exactly the use case. The Princeton PRO's porcelain enamel fused over steel gives a hard surface that resists scratching and staining better than an acrylic or fiberglass tub, which chalks and scuffs under heavy tenant turnover. It's also far lighter to carry up a stairwell than cast iron. The tradeoff versus acrylic is that a dropped tool can chip enamel, so protect the floor during trim-out.

Yes, the floor is textured to reduce slipping, so you don't need to add an aftermarket mat or adhesive strips. Useful where a facility is standardizing bathing fixtures across units.

That's its purpose. The flange is formed into the tub on all three alcove sides so the backer board and tile lap over it, shedding water back into the tub instead of behind the wall. Nail the flange to the studs per the instructions and the assembly protects the framing, which is the usual failure point on a tub that has no integral flange.

White only, ordered as part number 1391202.02. There is no second color option on the right-hand outlet version, which keeps it simple if you're matching existing white fixtures across a building.