You may also like
American Standard Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever Handle - AMS-7385003
Model: AMS-7385003
Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever HandleSpeed Connect from American Standard—the pre-assembled drain that makes American Standard the easiest brand...
American Standard
$206.77
$161.57
American Standard Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever Handle - AMS-7385008
Model: AMS-7385008
Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever HandleSpeed Connect from American Standard—the pre-assembled drain that makes American Standard the easiest brand...
American Standard
$210.77
$165.57
American Standard Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever Handle - AMS-7385007
Model: AMS-7385007
Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever HandleSpeed Connect from American Standard—the pre-assembled drain that makes American Standard the easiest brand...
American Standard
$191.57
$145.57
American Standard Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever Handle - AMS-7385004
Model: AMS-7385004
Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever HandleSpeed Connect from American Standard—the pre-assembled drain that makes American Standard the easiest brand...
American Standard
Starting at
$191.57
$145.57
Reliant 3 4-Inch Centerset Single-Handle Bathroom Faucet 1.2 gpm/4.5 L/min With Lever Handle
- FEWER INSTALL PARTS — Exclusive Speed Connect pop-up drain requires fewer parts and installs in less time
- WATER TEMPERATURE SAFETY — Prevent accidental scalding with adjustable hot-limit safety stop
- WATER EFFICIENT — EPA WaterSense certified with 1.2 gpm/4.5 L/min. maximum flow rate to save water without sacrificing performance
- SUPPORTS SUSTAINABILITY — CEC Listed and CALGreen Compliant
- ADA COMPLIANT — For ease of use
- LIMITED LIFETIME WARRANTY — Product function and finish is guaranteed to be free from defect. See warranty for details.
Manufacturer Resources
Spec Sheet
Product Specs
- Product Type:
- Bath Faucet
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Faucets
- Department:
- Plumbing
- Country of Origin:
- Mexico
- Residential Commercial:
- Residential
- Luxury/Non Luxury:
- Non Luxury
American Standard 7385000.002 – Frequently Asked Questions
1) Will the American Standard Reliant 3 bathroom faucet fit a sink drilled with 4-inch centers?
Yes. The Reliant 3 is a 4-inch centerset faucet, so it mounts on a lavatory with three holes drilled on 4-inch centers. The spout and single lever handle sit on one escutcheon body that covers all three holes. It will not work on an 8-inch widespread deck or on a single-hole vessel sink without the matching deck plate arrangement.
2) Does the Reliant 3 single-handle lavatory faucet come with a pop-up drain, or do I order that separately?
The drain comes with it. The Reliant 3 includes American Standard's Speed Connect pop-up drain, which uses fewer parts than a conventional pop-up assembly and goes together faster under the sink. That matters on multi-unit work where you are setting dozens of lavs, and it means you are not sourcing a separate drain body and lift rod kit.
3) Is the Reliant 3 faucet ADA compliant for a commercial or public restroom?
Yes, the Reliant 3 is ADA compliant. The single lever handle operates without grasping, pinching, or twisting the wrist, which is what the requirement turns on. For a school, clinic, or hospitality washroom where the fixture schedule calls out ADA lavatory trim, this one meets it.
4) What is the flow rate on the Reliant 3 faucet, and will it satisfy California water-efficiency requirements?
Maximum flow is 1.2 gpm (4.5 L/min), and the faucet is EPA WaterSense certified. It is also CEC Listed and CALGreen Compliant, so it meets California Energy Commission listing and CALGreen requirements for lavatory faucets. That combination is what a green-building or LEED-oriented spec usually asks for on a bathroom faucet.
5) I'm replacing an old two-handle 4-inch faucet in an apartment. Will the Reliant 3 drop into the same holes?
It will cover the same drilling. A two-handle 4-inch centerset and this single-handle Reliant 3 both mount to three holes on 4-inch centers, so the deck prep is the same; you are swapping to one lever instead of two handles. Plan on pulling the old pop-up drain too, since the Speed Connect drain is part of this faucet and has its own assembly.
6) Can I limit how hot the water gets on the Reliant 3 faucet for a daycare or senior housing unit?
Yes. The Reliant 3 has an adjustable hot-limit safety stop built into the valve, so you can cap the handle travel on the hot side and reduce the scald risk at the outlet. It is set during install and can be readjusted later if the building's supply temperature changes.
7) What finishes does the Reliant 3 centerset bathroom faucet come in?
Two: polished chrome (model 7385000.002) and brushed nickel (model 7385000.295). Chrome is the usual choice when you are matching existing washroom trim in an older commercial building or keeping a large multi-family fleet standardized on one look; brushed nickel is the warmer finish for renovated units and hospitality baths.
8) Which model number do I order for the brushed nickel Reliant 3 faucet?
Brushed nickel is American Standard part 7385000.295. If you need chrome instead, that is 7385000.002. The suffix after the decimal is the finish code, so the body number stays 7385000 either way, which makes it easy to standardize the base model across a property and vary only the finish by building.
How fast can I get the American Standard 7385000.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 7385000.002 come with a warranty?
Absolutely. The American Standard 7385000.002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 7385000.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 7385000.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.