American Standard Selectronic ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$526.71
$476.71
American Standard Selectronic IC Touchless Faucet, Base Model, 1.5 gpm/5.7 Lpm Laminar Flow in Base - AMS-605B193

American Standard Selectronic IC Touchless Faucet, Base Model, 1.5 gpm/5.7 Lpm Laminar Flow in Base - AMS-605B193

(No reviews yet) Write a Review

Model: 605B193.002
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$526.71
$476.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Selectronic IC Touchless Faucet, Base Model, 1.5 gpm/5.7 Lpm Laminar Flow in Base
  • POWER KIT MUST BE PURCHASED SEPARATELY
  • Ideal for healthcare. Laminar flow in spout base. Plain spout end
  • Touchless operation limits the spread of germs
  • Single inlet for cold or tempered water
  • Sensor is easily programmed with optional remote control
  • Auto Purge: Periodically purges stagnant water
  • Safety Timer: Automatically turns water off after 55 seconds
  • Vandal-resistant 1.5 gpm/5.7 Lpm pressure-compensating laminar flow in spout base
  • Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available

Manufacturer Resources

Product Specs

Product Type:
Faucet
Product Group:
Kitchen
Product Subgroup:
Faucets
Family:
SELECTRONIC
Luxury/Non Luxury:
Non Luxury
Residential Commercial:
Commercial
Product Length:
17.2
Product Height:
4.2
Product Weight:
6.226
Product Width:
10.4
Department:
Plumbing

American Standard 605B193.002 – Frequently Asked Questions

1) Does the American Standard Selectronic 605B193 touchless faucet come with a power supply?
No. The power kit for the Selectronic IC faucet has to be ordered separately, so budget for it on the same purchase order. Without it the sensor and solenoid have nothing driving them and the faucet will not run.
2) Will the Selectronic 605B193 faucet mix hot and cold water?
It won't. The 605B193 is a single inlet faucet, fed with either cold or pre-tempered water. If you need a controlled outlet temperature at the fixture, the tempering has to happen upstream with a thermostatic mixing valve, not at the faucet.
3) Can this touchless faucet mount on a 4-inch or 8-inch center sink deck?
Yes, with the optional deck plate. The Selectronic IC base model is a single-hole faucet, and American Standard offers deck plates to cover 4-inch (102 mm) or 8-inch (203 mm) centerset holes. The plate is ordered on its own.
4) Is the American Standard Selectronic IC faucet suitable for a hospital or clinic sink?
That is the intended use. It is a commercial-duty faucet, hands-free so users never touch the fixture, and the laminar stream comes out of the spout base rather than an aerator, which is the configuration specified in healthcare because aerators can harbor bacteria. The spout end is plain for the same reason.
5) What is the flow rate of the 605B193 Selectronic faucet?
1.5 gpm (5.7 Lpm), delivered through a vandal-resistant pressure-compensating laminar outlet in the spout base. Pressure compensating means the rate holds steady as building supply pressure swings, which matters when a bank of these fires at once in a restroom or clinic.
6) How long does the water run on a Selectronic touchless faucet before it shuts off?
A safety timer cuts the water at 55 seconds, so a blocked or fooled sensor cannot leave a sink running. There is also an auto purge that briefly runs the faucet on a schedule to flush stagnant water out of the line, which is what facilities want on low-use fixtures.
7) Can the sensor range and timing on this faucet be adjusted after installation?
Yes. The sensor is programmed with an optional remote control, which means settings can be changed without pulling the faucet or getting under the deck. The remote is not part of the faucet and is bought separately.
8) How much does the Selectronic IC touchless faucet weigh and what is its shipping size?
About 6.226 lbs, with carton dimensions of 17.2 x 10.4 x 4.2 inches. Useful if you are staging a multi-fixture order and need to know how much space a pallet of them takes.
How fast can I get the American Standard 605B193.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 605B193.002 come with a warranty?
Absolutely. The American Standard 605B193.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 605B193.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 605B193.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!