American Standard Serin Touchl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$618.70
$568.70
American Standard Serin Touchless Faucet, Base Model, 0.35 gpm/1.3 Lpm - AMS-206B106

American Standard Serin Touchless Faucet, Base Model, 0.35 gpm/1.3 Lpm - AMS-206B106

(No reviews yet) Write a Review

Model: 206B106.002
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$618.70
$568.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Serin Touchless Faucet, Base Model, 0.35 gpm/1.3 Lpm
  • POWER KIT MUST BE PURCHASED SEPARATELY
  • Touchless operation limits the spread of germs
  • Sensor in spout tip for streamlined style and reduced vandalism
  • Self-adjusting sensor automatically sets range for optimum performance
  • Single inlet for cold or tempered water
  • Vandal-resistant brass spout with single-hole installation
  • Safety Timer: Automatically turns water off after 55 seconds
  • Vandal-resistant 0.35 gpm/1.3 Lpm pressure-compensating multi-laminar spray
  • Optional deck plate for 4-inch (102 mm) or 8-inch (203 mm) centers available

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Touchless Faucet
Product Group:
Kitchen
Product Subgroup:
Faucets
Family:
SELECTRONIC
Product Length:
17.2
Product Height:
4.2
Product Weight:
6.426
Product Width:
10.4
Department:
Plumbing
Country of Origin:
Mexico
Product Color:
Chrome
Residential Commercial:
Commercial
Luxury/Non Luxury:
Non Luxury

American Standard 206B106.002 – Frequently Asked Questions

1) Does the American Standard Serin touchless faucet come with a power supply?
No. The power kit is sold separately on the Serin 206B106 touchless faucet, so you need to order it along with the faucet or the sensor has nothing to run on. Plan that into the order before the trades show up to set the fixture.
2) Will this faucet work in a 3-hole sink with 4-inch centers?
The Serin touchless faucet is a single-hole installation, so on a 3-hole deck you need the optional deck plate. American Standard offers deck plates for 4-inch (102 mm) and 8-inch (203 mm) centers, ordered separately from the faucet.
3) Can I run hot and cold to this faucet and mix at the spout?
No mixing at the faucet. It has a single inlet, fed with either cold or tempered water, so temperature has to be set upstream, typically at a thermostatic mixing valve or a point-of-use tempering valve under the deck. If the spec calls for user-adjustable temperature at the fixture, this is the wrong faucet.
4) Is the Serin 206B106 touchless faucet approved for commercial restroom use?
It is classified as a commercial fixture in American Standard's SELECTRONIC family, which is their sensor-operated line. The vandal-resistant brass spout with the sensor buried in the spout tip and a vandal-resistant spray outlet are the features that matter in a public restroom.
5) What flow rate does this touchless faucet deliver, and will it meet a low-flow requirement?
Flow is 0.35 gpm (1.3 Lpm) through a pressure-compensating multi-laminar spray, so output stays consistent as line pressure varies. That is well under the 0.5 gpm ceiling most public lavatory low-flow specs are written to, which makes it a common pick for water-conservation retrofits.
6) How long does the water run on each activation, and can it stick on?
A safety timer shuts the water off automatically after 55 seconds, so a blocked or fouled sensor will not leave the faucet running and flood a restroom. That timer is one of the main reasons facilities buyers choose a sensor faucet over a metering push valve.
7) Does the sensor need to be calibrated after installation?
No field calibration is required. The sensor is self-adjusting and sets its own detection range, which matters in the field because sink bowl depth and color otherwise change how a fixed-range sensor behaves. Locating the sensor in the spout tip also keeps it out of reach of tampering.
8) What finish does the Serin 206B106 touchless faucet come in?
Chrome only, ordered as MPN 206B106.002. If you are standardizing a floor of restrooms on a brushed or matte finish, this model will not match it.
9) How big is this faucet, and how much does it weigh for shipping?
American Standard lists the Serin touchless faucet at 17.2 long by 10.4 wide by 4.2 high inches and 6.426 pounds. The low overall height is worth checking against any wall-hung backsplash or mirror clearance behind the deck.
How fast can I get the American Standard 206B106.002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 206B106.002 come with a warranty?
Absolutely. The American Standard 206B106.002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 206B106.002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 206B106.002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!