American Standard Studio Carre Under Counter Sink - AMS-426000

The Studio Carre is a square undercounter sink with nominal dimensions of 16 x 16 inches (405 x 405 mm), and the bowl itself is 13-1/2 inches wide, 13-1/2 inches front to back, and 4-3/4 inches deep (344 x 344 x 121 mm). It ships with a mounting template, so cut the counter to the template rather than to the nominal figure.

Yes. A mounting kit, part 7301442-0070A, and a template are supplied with the sink. You still supply the counter adhesive/sealant, the faucet, and the drain assembly, since the faucet mounts in the deck or wall on an undercounter installation rather than on the sink.

No. The Studio Carre ships as the vitreous china bowl with its mounting kit and template only. Faucet, tailpiece, P-trap, and supplies are separate, and because it is an undercounter bowl the faucet holes are drilled in the counter or the faucet is wall mounted, so pick the faucet centers before the top is fabricated.

Yes, the overflow position on the Studio Carre is customizable, which matters when the counter or backsplash forces the drain and overflow to one side. Confirm the orientation you want at install, since the sink is set from below and the overflow location is fixed once it is bonded to the counter.

The Studio Carre bowl is vitreous china, the standard material for commercial and multi-family lavatories: glazed, non-porous, and cleanable with ordinary washroom chemicals. Because it mounts under the counter, the counter material carries the wear at the rim and the china bowl stays out of the traffic path.

Undercounter is the choice when you have a stone, quartz, or solid surface top and want the counter edge exposed with no rim sitting on it, which also makes wipe-down easier. A drop-in or self-rimming bowl is the better pick on laminate tops, where an undermount cutout leaves an unfinished edge. The Studio Carre is strictly an undercounter square bowl, so it needs a top that can be polished at the cutout.

It is sold in white, ordered as American Standard 426000.02. White is the only finish offered, which is what makes it straightforward to standardize across a floor of restrooms or units.