American Standard Studio S Freestanding Bathtub Drain Kit - AMS-1582200

The Studio S 1582200 is built specifically for freestanding tubs, where the drain and overflow are part of the tub body rather than hidden behind a wall or an access panel. That is why it is finished on every exposed surface to match Studio S faucets. If you are working a standard alcove or drop-in tub with a wall-side overflow plate, this is not the right kit.

Toe-tap. You push the stopper down with your foot to close and push again to open, so there is no trip lever, no linkage, and no overflow face plate cable to set. That matters on a freestanding install where there is no wall to mount a trip lever to, and it is one less thing to adjust after the tub is set.

No. The 1582200 is the drain and toe-tap stopper assembly for the tub itself. The trap and the drain line below it are separate, so plan on supplying the trap and any tailpiece or adapter needed to reach your rough-in. On a freestanding tub over a slab, that rough-in location is set before the tub is placed, so confirm the floor drain lines up with the tub outlet.

American Standard classifies the Studio S 1582200 as a residential product, not a commercial-duty one. For a multi-family unit bath or a hotel guest room that is normally the right class of fitting, and property managers use residential-rated trim in those spaces routinely. For a high-traffic public or institutional washroom, spec a commercial-duty drain instead.

Ordering the same finish code across the job gives you identical trim on every tub. Chrome is .002, brushed nickel is .295, matte black is .243, and brushed cool sunrise is .GN0. Where the tub fillers are also Studio S, the drain is finished to that same family, so the whole opening reads as one set rather than a near-miss between two brands of plating.