American Standard Townsend 8-Inch Widespread 2-Handle Bathroom Faucet 1.2 gpm/4.5 L/min - AMS-7353801

Yes, as long as the holes are drilled on 8-inch widespread centers. The Townsend 7353801 is a two-handle widespread faucet: separate hot and cold handles and a separate spout, each mounting in its own hole. It will not work on a 4-inch centerset deck or a single-hole sink.

A metal push pop-up drain is included in the box, along with flexible stainless steel supply hoses. For a full sink install you still supply the P-trap and the stops/supply risers at the wall.

It flows 1.2 gpm (4.5 L/min) through a pressure-compensating aerator, which holds that rate steady across varying supply pressure. That is below the 2.2 gpm federal maximum for lavatory faucets and meets the 1.2 gpm lavatory limit used by most water-conservation programs and by California and Colorado code.

Five finishes, each its own part number: Chrome (7353801.002), Polished Nickel (7353801.013), Matte Black (7353801.243), Brushed Nickel (7353801.295), and Brushed Cool Sunrise (7353801.GN0). The suffix after the dot is the finish code, so order by the full number if you are matching other trim in the room.

American Standard classes the Townsend 7353801 as a residential lavatory faucet, so it is aimed at guest baths, apartment units, hotel rooms and owner-occupied bathrooms rather than high-traffic public restrooms. For an in-unit bathroom in a multi-family or hospitality property it is a normal choice; for a public restroom with heavy cycling, a metering or sensor faucet is the better call.

It uses ceramic disc valve cartridges rather than rubber washers, which is the wear item that causes most drips. The spout and handles are metal, not plastic, so there is no plastic shank to crack under a wrench.

The supply connections are flexible stainless steel cable hoses, which bend in tighter quarters than rigid copper risers and make the connection easier when you are working blind behind a bowl. Widespread faucets do need access to all three deck holes from below, so a deck-mount install is much simpler before the sink is set.

The faucet is listed at 7.981 lb, with packed dimensions of 19.134 x 13.268 x 3.386 inches. Useful if you are ordering by the pallet for a unit turn or a multi-bath job.