Bobrick B-3091 Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Satin-finish stainless steel. Mounts flush against side wall in accessible toilet compartment to allow clearance for grab bar above unit has toilet tissue dispenser on left side of unit. Toilet seat-cover dispenser holds 500 paper covers. Removable waste disposal for servicing. Capacity: 0.4-gal. (1.5-L). Rough Wall Opening 26-5/8″ W x 12-5/8″ H x 4″ (675 x 320 x 102mm). Patent Pending
Features
- Stainless steel, satin finish
- Recessed-Mounted
- Wall Opening 26-5/8″ W x 12-5/8″ H x 4″
- Toilet seat-cover dispenser holds 500 paper covers
- Removable waste disposal for servicing.
Product Specs
- Finish : Satin-Finish Stainless Steel
- Mounting Options : Recessed Mounted (Single Sided)
- Orientation : Horizontal
- Sanitary Disposal : Included
- Configuration : Left Side of Toilet While Seated
- Accessibility : ADA Compliant
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Product Type:
- Seat-Cover Dispenser
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Seat-Cover Dispenser
- Product Style:
- Recessed
- Product Material:
- Stainless Steel
- Department:
- Plumbing
- Product Depth:
- 4"
Bobrick 3091 – Frequently Asked Questions
1) Will the Bobrick B-3091 fit next to a grab bar in an accessible toilet compartment?
That is exactly what the B-3091 is built around. It mounts flush against the side wall of an accessible toilet compartment so there is clearance for the grab bar above it, and the whole unit is horizontal rather than stacked vertically. Bobrick lists it as ADA compliant. The tissue dispenser sits on the left side of the unit, and the unit is positioned on the left side of the toilet as you are seated.
2) Can the Bobrick B-3091 be mounted on the wall surface instead of recessed?
No. The B-3091 is a recessed unit only, single sided, and it needs a 4 inch deep pocket in the wall. If your partition cannot be opened up, or you are retrofitting a finished masonry wall, you need a surface mounted tissue/seat cover/waste combination instead. Do not try to face mount this one.
3) Does the Bobrick B-3091 handle seat covers, tissue and sanitary waste in one unit?
All three, in a single recessed cabinet. Seat cover dispenser holds 500 paper covers, there is a toilet tissue dispenser on the left side, and a sanitary waste disposal is included with a 0.4 gallon (1.5 L) capacity. For a compartment where wall space is tight, that is three separate accessories and three separate wall openings collapsed into one.
4) Is the Bobrick B-3091 handed, and does it matter which side of the toilet I put it on?
It is handed by layout. The unit is meant for the left side of the toilet as you are seated, with the tissue dispenser on the left side of the cabinet so the roll falls within reach from the seat. Mirror the compartment and the tissue ends up on the far side of the unit from the user. Confirm which side of the fixture your compartment puts the wall on before you cut the opening.
5) Is the B-3091 waste container removable for housekeeping to empty?
Yes, the waste disposal pulls out for servicing, so a custodian empties the liner without unbolting anything. At 0.4 gallon (1.5 L) the receptacle is sized for one accessible compartment, not for a whole restroom, so plan on it being part of the normal round rather than something serviced weekly in a high traffic building.
6) What material and finish is the Bobrick B-3091, and will it hold up in a high traffic public restroom?
Stainless steel with a satin finish, which is the standard specification for public and institutional washrooms because it takes abuse, does not corrode from cleaners, and does not show wear the way painted steel does. Satin is the only finish offered on the B-3091, so a facility standardizing across restrooms gets a consistent look with other satin stainless Bobrick accessories.
7) Can I recess a B-3091 into a toilet partition panel instead of a wall?
Not reliably. The unit needs a 26-5/8 x 12-5/8 inch opening at 4 inches of depth, and typical toilet compartment panels are around an inch thick, so there is no cavity to take it. Plan this into a stud or furred masonry side wall of the compartment. If the only surface you have is a partition panel, a surface mounted combination unit is the way to go.
8) How many seat covers and rolls does the B-3091 hold before it needs refilling?
The seat cover side holds 500 paper covers. Tissue is dispensed from the left side of the cabinet. For a single accessible stall that is a reasonable service interval, but the 0.4 gallon (1.5 L) waste receptacle is the item that fills first in most buildings, so let that set your restocking round rather than the cover count.
How fast can I get the Bobrick 3091 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 3091 come with a warranty?
Absolutely. The Bobrick 3091 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 3091?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 3091 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.