NUVO Lighting 60-7542 Homestead, 1-Light, Large Wall Lantern, Matte Black & Wood Finish with Clear Seeded Glass

Yes. The Homestead 60-7542 carries a Wet location rating and is built for outdoor use, so it can go on an unprotected wall, over a garage door, or anywhere direct rain hits it. It is safety listed cETLus. Housing is aluminum, steel and glass.

It takes one medium base (E26) lamp up to 60W, and no bulb is included, so order lamps separately. NUVO specs the fixture around a T9 shape lamp, which suits the clear seeded glass since the filament is on show. An LED or CFL with an E26 base works too as long as you stay at or under 60W equivalent draw for the fixture rating.

Extension off the wall is 6.875 inches, with an overall size of 6.25 inches wide by 18.75 inches high. That projection matters beside a door swing or on a narrow walkway, and at 6-1/4 inches wide it fits on most standard pilaster or siding faces without crowding the trim.

No. The Homestead 60-7542 is not ADA compliant, and with a 6.875 inch extension it projects past the 4 inch limit for protruding objects mounted between 27 and 80 inches above the floor. For a code-restricted path of travel, pick a flush ADA style outdoor sconce instead.

Dimming depends entirely on the lamp you put in it. The fixture itself has no driver or integrated LED, it is a straight incandescent style socket on 120V, so a standard incandescent lamp dims on a common line voltage dimmer. Drop in an LED and dimming performance is whatever that LED supports.

It weighs 7.91 lbs, which a standard 4 inch round or octagonal outdoor box secured to framing carries without added blocking. It is a wall mount fixture only, not rated for post or pendant mounting.

Matte black metal with a wood finish accent and clear seeded glass, in a rustic style. It is part of NUVO's Homestead collection, so if you are standardizing across a multi-family or hospitality property you can specify Homestead pieces to keep the same black and wood look on every opening. The clear seeded glass shows the lamp, so use the same bulb type on every fixture or they will not look alike.

Yes, lead is the listed Prop 65 chemical for this fixture. It is also not RoHS compliant. Institutional and government buyers who require RoHS on electrical purchases should note that before specifying it.

No. There is no CCT selection on this lantern, because there is no integrated LED module in it at all, just a 120V E26 socket. Color temperature is whatever lamp you install, so buy all your bulbs at one CCT if you are lighting a row of units.