TOTO ECOPOWER Touchless Concea...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$872.23
TOTO ECOPOWER Touchless Concealed Toilet Flush Valve

TOTO ECOPOWER Touchless Concealed Toilet Flush Valve

(No reviews yet) Write a Review

Model: TET2GB#SS
From the Flush Valve Collection
$872.23
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$872.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

TOTO ECOPOWER 1.6 GPF Toilet Flushometer Valve is ideal for high-traffic spaces, providing an elegant water conservation solution. The in-wall concealed valve adds an additional level of sophistication to the commercial space. Engineered to require no electricity or routine battery replacement, the ECOPOWER Flushometer Valve saves energy and water while providing maximum performance in even the most demanding commercial spaces. Powered by the force of running water, ECOPOWER hydro-turbines create an electrical current that is stored in rechargeable cells to power the sensor of the valve. The ECOPOWER flush valve is highly efficient, replenishing power stores with no minimum daily usage. No external power source or battery replacement is necessary. Ensuring that water flows only when needed, the self-adjusting ECOPOWER sensor eliminates ghost flushing that wastes water. A manual override flush button is present when needed. The piston and solenoid mechanism, a marked improvement over traditional rubber diaphragm type valves, maintains consistent flush volume under a range of supply pressures. The valve is ADA compliant. Includes flushometer valve and cover plate. Purchased separately: angle stop and vacuum breaker set

Features

  • ECOPOWER 1.6 GPF Toilet Flushometer Valve
  • Concealed valve with brushed stainless steel cover plate provides an additional level of sophistication
  • Powered by the force of running water: No external power source or battery replacement is necessary
  • Replenishes power stores with no minimum daily usage
  • Programmed timing eliminates ghost flushing that wastes water
  • Manual override flush button
  • Piston and solenoid mechanism: a marked improvement over traditional rubber diaphragm type valves
  • Tailpiece adjusts for neutral rough-in
  • ADA compliant
  • Includes flushometer valve
  • cover plate
  • 1" angle stop

 

Model No Weight GPF
TET2LB32#SS 22.3 1.28
TET2UB33#SS 22.4 1
TET2UB31#SS 22 1
TET2GB#SS 18.3 1.6
TET2LB31#SS 22 1.28
TET2GB33#SS 22.4 1.6
TET2GB32#SS 22.3 1.6
TET2UB#SS 18.3 1
TET2UB32#SS 22.3 1
TET2LB#SS 18.3 1.28
TET2LB33#SS 22.4 1.28
TET2GB31#SS
 22 1.6

 

Product Specs

ADA Compliant:
Yes
Battery Included:
Yes
CALGreen:
No
CEC:
No
Installation Type:
Concealed
WaterSense:
No
Product Type:
Commercial
Battery Type:
Lithium Ion
Collection:
Flush Valve
Product Group:
Washroom/Bath
Product Subgroup:
Flush Valve
Product Length:
4.875
Gallons Per Flush (GPF):
1.6
Product Height:
12.625
Product Weight:
18.3
Product Width:
14.1875
Department:
Plumbing

TOTO TET2GB#SS – Frequently Asked Questions

1) Does the TOTO ECOPOWER concealed flush valve need power or batteries run to the wall?
No wiring and no battery changes. The ECOPOWER valve runs a hydro-turbine off the water flowing through it each flush, and that current charges an internal lithium ion cell that powers the sensor. The cell ships in the valve. There's no minimum daily flush count needed to keep it charged, so it holds up in a restroom that only sees light traffic as well as one that runs all day. For a retrofit that means no conduit, no transformer, and no maintenance ticket for battery replacement across a building full of fixtures.
2) What has to be specified when ordering a TOTO TET2 flush valve, and what do I have to buy separately?
Three things get chosen on the order form: flush volume, spud arrangement, and whether you want the high efficiency build. Flush volume runs 1.6, 1.28, or 1.0 GPF. Spud is Valve Only, Top Spud, Back Spud Wall, or Back Spud Floor, so it needs to match how the bowl's inlet comes at it. Finish is brushed stainless steel on the cover plate across the board. The box holds the flushometer valve and the cover plate. The angle stop and vacuum breaker set are bought separately, so put those on the same order or the fixture won't be finished.
3) Which GPF should I pick for a TOTO TET2 flush valve on a commercial restroom retrofit?
Match the valve to the bowl, not to the water goal. The bowl is engineered for a rated flush volume, and a valve set below it leaves waste in the trap and creates double-flushing that costs more water than it saves. The TET2 comes at 1.6 GPF for standard commercial bowls, 1.28 GPF for high efficiency bowls, and 1.0 GPF for the ultra high efficiency ones. If you're replacing an existing valve, read the volume stamped on the bowl or the old valve and order the same number.
4) How much wall space does the TOTO TET2 concealed valve need behind the finished wall?
Plan the rough opening around 14-3/16 x 12-5/8 x 4-7/8 inches, which is the valve assembly's stated size. The 4-7/8 inch figure is the one that decides whether the job works: a standard 2x4 stud cavity will not swallow it, so the chase has to be furred out or built from 2x6 or a proper plumbing wall. The tailpiece adjusts, so a neutral rough-in gives you some tolerance on the connection to the bowl.
5) Concealed flush valve or exposed flushometer, which one do I want?
Concealed means the valve body sits inside the wall behind an access panel and only a brushed stainless cover plate shows in the room. That's the choice where vandalism or appearance matters, in an airport, stadium, school, or a hotel restroom. The cost is access: you need a chase deep enough to take the valve and a way to reach it for service. An exposed flushometer mounts on the finished wall above the bowl, which is faster to install and faster to service, and is the usual answer in a back-of-house or utility restroom. The TET2 is the concealed type.
6) Will a TOTO ECOPOWER flush valve meet ADA requirements for a public restroom?
The TET2 flush valve is ADA compliant. It's touchless, so there's no grasping, pinching, or wrist twisting to operate it, and the manual override is a push button rather than a handle. That covers the operable-parts requirement for the flush control itself. Mounting height and clear floor space are set by how you install it, not by the valve.
7) Do TOTO ECOPOWER sensor valves ghost flush like older infrared flushometers?
No. The ECOPOWER sensor is self-adjusting and the flush timing is programmed, so it doesn't fire on someone walking past or on a reflection off the partition. That's the complaint that drives most sensor valve replacements in a busy facility, and it's what the programmed timing is there to stop. There's also a manual override button for the case where someone wants to flush on their own.
8) Will a TOTO TET2 flush valve hold flush volume if my building has swinging water pressure?
It uses a piston and solenoid mechanism instead of the rubber diaphragm found in traditional flushometers, and that holds a consistent flush volume across a range of supply pressures. Practical difference on a high-rise or a campus loop: the top-floor fixtures flush the same as the ground-floor ones, and there's no diaphragm to harden and start short-flushing after a few years.
9) Can I standardize one TOTO TET2 valve across every toilet in my facility?
Across a facility you'll still order more than one part number, because the spud arrangement has to follow each bowl. Wall-hung bowls generally take Back Spud Wall, floor-mount bowls with a rear inlet take Back Spud Floor, and a bowl fed from above takes Top Spud. Valve Only covers the case where the spud connection is already in place. What does standardize is everything else: same TET2 valve, same brushed stainless cover plate, same touchless operation, same no-battery service routine on every opening.
10) How heavy is a TOTO TET2 concealed flush valve for in-wall mounting?
About 18.3 pounds for the valve assembly. That's real weight hanging in a chase, so the carrier or backing behind the wall has to be sized to take it rather than relying on the finished wall board. Worth confirming with your framing before the wall closes up.
How fast can I get the TOTO TET2GB#SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the TOTO TET2GB#SS come with a warranty?
Absolutely. The TOTO TET2GB#SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the TOTO TET2GB#SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the TOTO TET2GB#SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!