A.Y. McDonald 5182-360 Angle S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$100.51
A.Y. McDonald 5182-360 Angle Stop Valve for Water Supply Rough-In

A.Y. McDonald 5182-360 Angle Stop Valve for Water Supply Rough-In

(No reviews yet) Write a Review

Model: 5182-360

In Stock (leaves warehouse same day if ordered before 3pm ET)

$100.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

A.Y. McDonald 5182-360 Angle Stop Valve

The A.Y. McDonald 5182-360 is an angle-configuration stop valve built for rough-in water supply connections, designed to be installed where a supply line needs to change direction while providing a reliable point of shutoff. A.Y. McDonald is a long-established manufacturer of waterworks and plumbing valve products, and the 5182-360 carries that same model-specific engineering into the angle valve category. This part is intended for use by plumbing contractors and installers working behind fixtures, walls, and under floors where an angle-pattern valve is the correct fit for the available space and pipe routing. As a rough-in component, it is meant to be paired with the appropriate supply tubing and fixture connection on the job, not selected for decorative finish.

Key Features

  • Angle Configuration: The 5182-360 is built in an angle pattern, allowing the supply line to turn a corner at the shutoff point instead of running straight through, which is useful in tight rough-in spaces behind fixtures and walls.
  • Model 5182-360: This is a specific catalog model within A.Y. McDonald's valve lineup, manufactured to that model's defined configuration for consistent fit and function on repeat installations.
  • Shutoff Function: As a stop valve, the primary job of this part is to give the installer or homeowner a dedicated point to isolate water flow to an individual fixture or supply run without shutting down the whole system.
  • Rough-In Application: This is a behind-the-wall/under-the-floor trade plumbing component intended for use by licensed plumbers and contractors during new construction or repipe work, not a finished decorative fixture.
  • A.Y. McDonald Manufacturing: Produced by A.Y. McDonald, a manufacturer recognized in the waterworks and plumbing supply trade for valves, fittings, and related rough-in hardware.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • Fixture Supply Line Shutoff Points
  • New Construction Water Service Connections
  • Repipe and Remodel Plumbing Projects

Why A.Y. McDonald?

A.Y. McDonald has built a reputation in the waterworks and plumbing trade around dependable, model-specific valve products like the 5182-360 angle stop valve. Contractors specify A.Y. McDonald components when they need a manufacturer-defined part number they can order consistently across jobs, ensuring the same fit and function every time it goes into the wall or floor. For rough-in plumbing work where the shutoff point matters as much as the pipe it serves, choosing a purpose-built angle valve from an established manufacturer helps keep the installation straightforward and repeatable.

"

Manufacturer Resources

Product Specs

list_batch:
AYM-20260924
Product Type:
Angle Valve
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Plumbing

A.Y. McDonald 5182-360 – Frequently Asked Questions

1) What is the A.Y. McDonald 5182-360 used for in a plumbing rough-in?
The A.Y. McDonald 5182-360 is an angle stop valve for water supply rough-in. It gives you a dedicated shutoff at an individual fixture or supply run, so you can isolate that fixture without killing water to the whole building. It goes in during new construction, repipe, or remodel work behind fixtures, in walls, and under floors.
2) When should I use an angle stop instead of a straight stop valve?
Use the angle pattern, like the 5182-360, when the supply line has to turn a corner at the shutoff point, which is the usual case when the stub comes out of the wall and the riser runs up to the fixture. A straight stop is the one to use when the supply comes out of the floor and continues in the same direction. The angle body is also the easier fit where clearance behind a fixture is tight.
3) Is the A.Y. McDonald 5182-360 a finished trim valve or a rough-in part?
It is a rough-in trade component, not decorative trim. The 5182-360 is meant to be paired on the job with the appropriate supply tubing and fixture connection, and it is specified for function rather than finish. If you need a polished escutcheon-and-stop package that stays visible under a lavatory, that is a different class of product.
4) What exact part number do I order for the A.Y. McDonald angle stop so repeat jobs match?
Order it as A.Y. McDonald model 5182-360. That is the manufacturer part number, and it is what keeps the same fit and function going into the wall on every repeat install, which matters when a property manager or contractor is standardizing stops across a building.
How fast can I get the A.Y. McDonald 5182-360 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the A.Y. McDonald 5182-360 come with a warranty?
Absolutely. The A.Y. McDonald 5182-360 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the A.Y. McDonald 5182-360?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the A.Y. McDonald 5182-360 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!