ABB MS132 3-Pole MMP A-Range M...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$413.25
ABB MS132 3-Pole MMP A-Range Manual Motor Protector

ABB MS132 3-Pole MMP A-Range Manual Motor Protector

(No reviews yet) Write a Review

Model: MS132-6.3

In Stock (leaves warehouse same day if ordered before 3pm ET)

$413.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

ABB MS132 3-Pole MMP A-Range Manual Motor Protector

The ABB MS132 3-Pole MMP A-Range Manual Motor Protector delivers dependable overload and short-circuit protection for three-phase motor branch circuits in a single, manually resettable 3-pole device. As part of ABB's established MMP A-Range platform, this manual motor protector is offered across a Motor FLA selection spanning 1.0-1.6A, 1.6-2.5A, 4.0-6.3A, and 6.3-10.0A, so panel builders and electrical contractors can match protection to the exact full-load amperage of the motor being controlled. Each unit ships individually packaged (1 ea), making it easy to stock and specify across the full range of ABB MMP A-Range configurations for motor control applications in industrial and commercial facilities.

Key Features

  • 3-Pole Configuration: Purpose-built for three-phase motor circuits, delivering balanced protection across all three phases of the motor branch.
  • Motor FLA Range: Available across four Motor FLA settings — 1.0-1.6A, 1.6-2.5A, 4.0-6.3A, and 6.3-10.0A — allowing precise sizing to the connected motor's full-load current.
  • MMP A-Range Platform: Part of ABB's recognized Manual Motor Protector A-Range lineup, combining overload and short-circuit protection in one compact manual-reset device.
  • Manual Reset Operation: Provides straightforward manual reset functionality after a fault trip, simplifying troubleshooting and restoring motor circuits to service.
  • Individually Packaged: Supplied 1 ea per unit, supporting clean inventory counts and predictable per-unit ordering for panel builders and electrical contractors.
  • ABB Manufacturing Standards: Produced under ABB's global engineering and manufacturing standards for industrial motor control components.

Technical Specifications

  • Configuration: 3-Pole
  • Series: MMP A-Range
  • Motor FLA Options: 1.0-1.6A, 1.6-2.5A, 4.0-6.3A, 6.3-10.0A
  • Packaging: 1 ea (individually packaged)

Typical Applications

  • Three-Phase Motor Circuit Protection
  • Industrial Motor Control Panels and Motor Control Centers
  • Commercial and Industrial Electrical Installations
  • Panelboard and Motor Starter Assemblies
  • Renovation and New Construction Motor Control Projects

Why ABB?

ABB is a globally recognized manufacturer of industrial electrical and motor control equipment, and the MMP A-Range reflects that engineering discipline in a compact, reliable 3-pole manual motor protector spanning multiple Motor FLA settings for flexible sizing. Specifying ABB for motor circuit protection helps electrical contractors and panel builders deliver dependable, code-conscious motor control solutions built on a manufacturer with established industrial credentials. The MMP A-Range's manual-reset design supports straightforward maintenance and fast return-to-service after a protective trip, an important consideration for facilities that rely on continuous motor operation. Choosing a well-established platform like ABB's MMP A-Range also simplifies future sourcing, since the A-Range family is designed for consistent fit and function across ABB's broader manual motor protector offering, from the 1.0-1.6A setting up through 6.3-10.0A.

"

Manufacturer Resources

Product Specs

Product Type:
Manual Motor Protector
Configuration:
3-Pole
Series:
MMP A-Range
Department:
Electrical
Product Group:
Wiring Devices
Amperage Rating:
1.0A - 10.0A
Product Subgroup:
Motor Starters

ABB MS132-6.3 – Frequently Asked Questions

1) How do I pick the right ABB MS132 manual motor protector for my motor's full load amps?
Size the MS132 by the motor's nameplate FLA so the setting falls inside the device's adjustable range. The ABB MMP A-Range 3-pole units cover 1.0-1.6A (MS132-16), 1.6-2.5A (MS132-2.5), 4.0-6.3A (MS132-6.3) and 6.3-10.0A (MS132-1.0). Pick the band your FLA lands in, then dial the trip setting to the nameplate value rather than to the top of the range.
2) Can I use a 3-pole ABB MS132 manual motor protector on a single-phase motor?
The MS132 is a 3-pole device built for three-phase motor branch circuits, with protection across all three phases. It is not configured as a single-phase protector. If your load is single-phase, you want a single-phase or 2-pole motor protection device instead, or a different protection scheme entirely.
3) Does the ABB MS132 give both overload and short-circuit protection, or do I still need a separate breaker for the motor branch?
The MS132 combines overload and short-circuit protection in one manual-reset device for the motor branch circuit, which is the point of a manual motor protector: it replaces the separate overload relay plus branch protection arrangement in a motor starter. Upstream feeder and panel protection is a separate matter and is set by your one-line and local code.
4) My motor draws around 3 amps. Which ABB MS132 covers that?
Of the ABB MS132 3-pole units, the adjustable bands run 1.0-1.6A, 1.6-2.5A, 4.0-6.3A and 6.3-10.0A. A 3A motor sits between the 2.5A and 4.0A bands, so none of those four settings brackets it correctly. For a 3A FLA you need the intermediate 2.5-4.0A rating from the MS132 family rather than forcing the 2.5A or 6.3A unit, which would either nuisance trip or leave the motor under-protected.
5) What happens after the ABB MMP A-Range trips? Does it reset itself?
No automatic reset. The MMP A-Range is a manual-reset protector, so after a trip someone has to go to the device and reset it by hand. That is deliberate on motor circuits, it forces an operator to look at why the motor tripped before the load is put back on. Plan for physical access to the protector in the panel layout.
6) Can I standardize on the ABB MMP A-Range across a motor control center with different motor sizes?
That is the usual reason to spec the A-Range. All four 3-pole MS132 ratings, from 1.0-1.6A up through 6.3-10.0A, come off the same platform, so the footprint and function stay consistent across the MCC while each circuit gets a protector sized to its own motor. Stocking one family also simplifies replacement sourcing later.
7) Is the ABB MS132 sold individually or in a multi-pack for panel builds?
Each MS132 ships individually packaged, one unit per order quantity. For a panel build with several motor circuits you order one protector per motor, matched to each motor's FLA band, rather than a kit.
How fast can I get the ABB MS132-6.3 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ABB MS132-6.3 come with a warranty?
Absolutely. The ABB MS132-6.3 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ABB MS132-6.3?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ABB MS132-6.3 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!