AC/DC Voltage and GFCI Receptacle Outlet Test Kit
ET45VP - spec sheet
Features
- Works on GFI outlets and confirms operation of the ground fault protective device
- Voltage tester is rated CATIII 350V, Class 2, Double insulation and has IP44 ingress protection
- Nominal Voltage of receptacle tester - 110/125V AC at 50/60Hz in 3-wire outlet
- Batteries not required; voltage tester is powered by the applied voltage
- ET45: Built-in Test Lead Holders; RT210: Convenient Chart on the Tester
- Built-in test lead holder on back of voltage tester holds the leads in one of two positions - one so that they are spaced correctly to test tamper-resistant US-style outlets and the other for convenient storage of the test leads
- Tests DC voltages from 32 to 330V at four levels
- Receptacle tester detects the most common wiring problems in standard and GFCI receptacles
- Electronic voltage tester is designed to test AC voltages from 24 to 240V AC at four useful levels
Warnings
- Read, understand, and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
- Usage of this tester in any way other than that specified by the manufacturer can impair safe operation, resulting in severe injury or death.
- Always adhere to local and national safety codes. Use personal protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
- Before each use, verify tester operation by measuring a known voltage.
- Never use the tester on a circuit with voltages that exceed the category based rating of this tester.
ET45VP - spec sheet
Manufacturer Resources
Product Specs
- Depth:
- 7.8800 in
- Display:
- ET45 - Analog LED
- Drop Protection:
- ET45 - 9.9' (3 m); RT210 - 6.6' (2 m)
- Frequency:
- ET45 - 50/60 Hz
- Height:
- 1.3800 in
- Ingress Protection:
- ET45 - IP44
- Integral Lead Storage:
- ET45 - Yes
- Interchangeable Leads:
- ET45 - No
- Lead Length:
- ET45 - 9" (23 cm)
- Material:
- Plastic Housing, PCB with Electronic Components
- Overall Height:
- ET45 - 1.19" (3 cm); RT210 - 2.88" (7.3 cm)
- Overall Length:
- ET45 - 4.45" (11.3 cm); RT210 - 1.62" (4.1 cm)
- Overall Width:
- ET45 - 1.05" (2.7 cm); RT210 - 1.88" (4.8 cm)
- Pollution Degree:
- ET45 - 2
- Standard:
- ET45: CATIII 350V, CE
- Type:
- ET45 - Electronic Products; RT210 - GFCI and Standard Receptacle Tester
- Voltage:
- ET45 - AC Level Indicators - 24V, 48V, 120V, 240V; DC Level Indicators - 32V, 64V, 160V, 330V; RT210 - 110/125V AC at 50/60Hz in. 3-Wire Outlet
- Weight:
- 0.2240 lbs
- Width:
- 4.6300 in