ACSI M1510M-1-8205 - Sargent 8...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,156.10
$798.09
ACSI ACSI M1510M-1-8205 - Sargent 8200 Series Office, Entry Mortise Lock Body Fail Safe M1510M-1-8205-LL-26D-LC

ACSI M1510M-1-8205 - Sargent 8200 Series Office, Entry Mortise Lock Body Fail Safe

(No reviews yet) Write a Review

Model: M1510M-1-8205-LL-26D-LC
From the 1500 Series Collection

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,156.10
$798.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ACSI M1510M-1-8205-L SARGENT 8200 SERIES OFFICE, ENTRY MORTISE LOCK BODY FAIL SAFE L ROSE DESIGN OVERVIEW

M1510M-1-8205-L Sargent 8200 Series Office, Entry Mortise Lock Body Fail Safe L Rose Design. Sargent 8200 Series Office or Entry Mortise Lever Lock Modified with Fail Safe Operation (Power Lock), Standard Control Locks Outside (Secure Side) Trim, Motor Controlled, Less Cylinder.

ACSI Series 1500 Electric Mortise Locks provide safety and security for stairtower doors or controlled areas where both locking and latching are required. The locks are available in motor-controlled or solenoid-controlled to allow remote electric locking or unlocking while conforming to life-safety codes.

Buy the ACSI M1510M-1-8205-L Sargent 8200 Series Office, Entry Mortise Lock Body Fail Safe L Rose Design for easy installation and dependable door hardware solution.

ACSI M1510M-1-8205-L SARGENT 8200 SERIES OFFICE, ENTRY MORTISE LOCK BODY FAIL SAFE L ROSE DESIGN PRODUCT FEATURES

  • Function: 1510M-Fail Safe Control
  • Cylinder Type: Less Cylinder
  • Product Type: Electronic Mortise Lock
  • Electric Options: Latchbolt Monitor
  • Strike Type: Curved Lip
  • ADA Compliant: YES
  • Strike Size: 4-7/8" x 3/32"
  • Lever Size: 5 Inch
  • Hub Material: Cold Forged Steel
  • Standards: UL Listed; California State Fire Marshall Approved; ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1 with All Standard Trims; UL and cUL Listed; ANSI/UL 10C, Positive Pressure Fire Test of Door Assemblies
  • Case Dimensions: 7/64"" Thick
  • Function Description: Outside Trim is Locked When Power is Applied and Unlocked When Power is Removed (Storeroom Function When Energized); Lockset will Unlock in the Event of a Power Failure (Passage Function)
  • Front Size: 8" x 1-1/4"
  • Function Family: Fail Safe
  • Strike Lip: 1-1/4 Inch
  • Product Projection: 2-5/8 Inch
  • Minimum Stile Width: 4-1/2 Inch
  • Rose/Escutcheon Width: 3-1/2 Inch
  • Rose/Escutcheon Length: 3-1/2 Inch
  • Electrified Features: 12/24V at 250mA Inrush, 10mA Holding
  • Features: Simple User Selectable Fail Safe/Fail Secure Operation in Motor Controlled Locks; Continuous Duty Rated; Low Power Consumption; Interface With Life Safety Systems
  • Voltage: 12 to 24VAC/VDC
  • Grade: ANSI/BHMA Grade 1
  • Application: Fire Doors; Windstorm
  • Backset: 2-3/4 Inch
  • Handing: Reversible
  • Warranty: 10 Year Limited; 2 Year Limited Warranty on Electrified Locks
  • Door Thickness: 1-3/4 inch
  • Latch Throw: 3/4 Inch
  • Manufacturer Parent: ACSI
  • Latchbolt Size: 5/8" x 1"
  • Rose/Escutcheon Thickness: 5/16 Inch
  • Latchbolt Type: One Piece Anti-Friction Reversible Latch

ACSI M1510M-1-8205-L ELECTRIFIED MORTISE LOCKS AVAILABLE CONFIGURATION

ACSI M1510M-1-8205-L Sargent 8200 Series Office, Entry Mortise Lock Body Fail Safe L Rose Design
ACSI M1510M-1-8205-LB-26D-LC Sargent 8200 Series Mortise Lock Fail Safe L Rose Design, B Lever Design
ACSI M1510M-1-8205-LL-26D-LC Sargent 8200 Series Mortise Lock Fail Safe L Rose Design, L Lever Design
ACSI M1510M-AE-1-8205-LB-26D-LC Sargent 8200 Series Mortise Lock Fail Safe Authorized Egress L Rose Design, B Lever Design
ACSI M1510M-AE-1-8205-LL-26D-LC Sargent 8200 Series Mortise Lock Fail Safe Authorized Egress L Rose Design, L Lever Design

Product Specs

Series:
1500 Series
Collection:
1500 Series
Product Type:
Electronic Mortise Locks
ADA Compliant:
Yes
Features:
Simple User Selectable Fail Safe/Fail Secure Operation in Motor Controlled Locks, Continuous Duty Rated, Low Power Consumption, Interface With Life Safety Systems
Subcategory:
Electrified Mortise Locks
ANSI/BHMA:
UL Listed, California State Fire Marshall Approved, ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1 with All Standard Trims, UL and cUL Listed, ANSI/UL 10C, Positive Pressure Fire Test of Door Assemblies
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Type:
Mortise
Lock Function:
Entrance
Fail-safe / Fail-secure:
Field Selectable
Product Group:
Mechanical Locks
Product Subgroup:
Mortise Locks and Trim
Product Function:
Entrance
Electrical Configuration:
Latchbolt Monitor
Product Category:
Mechanical Locks
Department:
Door Hardware

ACSI M1510M-1-8205-LL-26D-LC – Frequently Asked Questions

1) What happens to the ACSI M1510M-1-8205 mortise lock when power is lost?
On power loss the outside lever unlocks and the lock behaves like a passage set, so anyone can get through. Power applied locks the outside (secure side) trim, which gives you storeroom function while energized. That is fail safe operation, and it is what you want on a stairtower or controlled area tied into a life safety system that has to release on alarm or power drop. Note the operation is field selectable between fail safe and fail secure on the motor controlled locks, so you are not locked into one behavior at install.
2) What voltage and current does this ACSI 1500 Series electrified mortise lock draw?
It runs on 12 to 24VAC or VDC, drawing 250mA inrush and 10mA holding. The low holding current means you can run several off a modest power supply, and it is continuous duty rated so it can sit energized indefinitely without cooking. Size your supply off the inrush figure, not the holding figure, if you are switching multiple locks at once.
3) Will this mortise lock fit my door, and what backset and thickness does it need?
It is built for a 1-3/4 inch door with a 2-3/4 inch backset, and needs a minimum stile width of 4-1/2 inches, so it will not go into a narrow stile aluminum door. The lock front is 8 x 1-1/4 inches and the case is 7/64 inch thick. Projection off the door face is 2-5/8 inches. The rose is 3-1/2 inches square and 5/16 inch thick. It is reversible, so you do not specify handing when you order.
4) Will this lock latch into the strike already in my frame?
The latchbolt is 5/8 by 1 inch with a 3/4 inch throw, and it ships matched to a curved lip strike measuring 4-7/8 x 3/32 inches with a 1-1/4 inch lip. If your existing frame has a standard ANSI 4-7/8 inch mortise strike prep you are lined up; if you are replacing an older lock with a shallower throw or a flat lip strike, plan on swapping the strike. The latch itself is a one piece anti-friction reversible type, which is what lets you flip handing in the field.
5) Does the ACSI M1510M-1-8205 come with a cylinder?
No. It is supplied less cylinder, so you order the mortise cylinder separately and key it into whatever system the building already runs. That is usually what a locksmith wants anyway, since it lets the lock go onto an existing keyway instead of forcing a new one. You will need a mortise cylinder with the correct cam for the Sargent 8200 body and a length suited to a 1-3/4 inch door.
6) Is this ACSI mortise lock Grade 1, and is it ADA compliant?
It carries ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1 with all standard trims, which is the top grade for mortise locksets and the usual spec line for institutional and high traffic commercial openings. It is ADA compliant, with a 5 inch lever rather than a knob so it operates without grasping or twisting.
7) Does this lock give any signal back to the access control panel?
Yes, it has a latchbolt monitor, so the panel sees whether the latch is actually projected rather than just whether power is applied. That is the difference between knowing a door is closed and knowing it is secured. Run the monitor conductors back with the lock power through the door loop or electric hinge.
8) What is the difference between the M1510M and the M1510M-AE version?
Both are fail safe motor controlled bodies built on the Sargent 8200 mortise lock. The AE models add authorized egress. Within each, the choice is lever design: LB is the B lever on the L rose, LL is the L lever on the L rose, both in 26D satin chrome, both less cylinder. So the ordering decisions are authorized egress or not, and which lever style matches the rest of your openings.
9) Should I use an electrified mortise lock like this or an electric strike for a stairtower door?
Use the mortise lock where you need both locking and latching controlled at the door leaf and a positive latch that stays engaged on a fire rated opening. An electric strike releases the frame side and depends on the existing lockset, which is fine for a single aluminum entry but does not give you latchbolt monitoring or storeroom function in the lock itself. The 1500 Series is built specifically for stairtowers and controlled areas that have to conform to life safety codes, and it is motor controlled, which draws far less standby current than a solenoid strike holding continuously.
How fast can I get the ACSI M1510M-1-8205-LL-26D-LC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ACSI M1510M-1-8205-LL-26D-LC come with a warranty?
Absolutely. The ACSI M1510M-1-8205-LL-26D-LC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ACSI M1510M-1-8205-LL-26D-LC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ACSI M1510M-1-8205-LL-26D-LC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!