ACSI M1510M-AE-1-L9070L Schlag...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,300.78
ACSI ACSI M1510M-AE-1-L9070L Schlage L Series Office, Entry Mortise Lever Lock Fail Safe Motor Controlled Authorized Egress ACSI-M1510M-AE-1-L9070L

ACSI M1510M-AE-1-L9070L Schlage L Series Office, Entry Mortise Lever Lock Fail Safe Motor Controlled Authorized Egress

(No reviews yet) Write a Review

Model: ACSI-M1510M-AE-1-L9070L-03A-626
From the 1500 Series Collection
$1,300.78
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,300.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ACSI M1510M-AE-1-L9070L SCHLAGE L SERIES OFFICE, ENTRY MORTISE LEVER LOCK FAIL SAFE AUTHORIZED EGRESS OVERVIEW

M1510M-AE-1-L9070L Schlage L Series Office, Entry Mortise Lever Lock Fail Safe Motor Controlled Authorized Egress.

Schlage L Series Classroom Mortise Lever Lock Modified with Fail Safe Operation (Power Lock), Authorized Egress (Request To Exit), Standard Control Locks Outside (Secure Side) Trim, Motor Controlled, Less Cylinder.

Buy the ACSI M1510M-AE-1-L9070L Schlage L Series Office, Entry Mortise Lever Lock Fail Safe Motor Controlled Authorized Egress for easy installation and dependable door hardware solution.

ACSI M1510M-AE-1-L9070L SCHLAGE L SERIES OFFICE, ENTRY MORTISE LEVER LOCK FAIL SAFE AUTHORIZED EGRESS PRODUCT FEATURES

  • Function: 1510M AE-Fail Safe w/Authorized Egress
  • Cylinder Type: Less Conventional Cylinder
  • Product Type: Electronic Mortise Lock
  • Strike Size: 4-7/8" x 1-1/4"
  • Manufacturer Parent: ACSI
  • Handing: Reversible
  • Latch Throw: 3/4 Inch
  • Spacing: 3-7/8" (Knob or Lever to Cylinder); 2-11/16" (Knob or Lever to Thumbturn Hub)
  • Function Description: Outside Trim is Locked When Power is Applied and Unlocked When Power is Removed (Storeroom Function When Energized); Lockset will Unlock in the Event of a Power Failure (Passage Function)
  • Electrified Features: 12/24V at 250mA Inrush, 10mA Holding
  • Hand: Field Reversible
  • Grade: ANSI/BHMA Grade 1
  • Case Dimensions: 4-7/16" x 6-1/16" x 1"
  • ADA Compliant: YES
  • Front Size: 1-1/4" x 8" x 7/32"
  • Latchbolt Type: Stainless Steel Latch With Anti-Friction Tongue
  • Function Family: Fail Safe
  • Standards: UL Listed; California State Fire Marshall Approved; ANSI/BHMA A156.13-2017 Series 1000, Grade 1 Operational and Security; ASTM F476-76 Grade 40; Complies with ICC A117.1; UL 10C and CAN/ULC-S104
  • Voltage: 12 to 24VAC/VDC
  • Door Thickness: 1-3/4 inch
  • Rose/Escutcheon Width: 2-1/8 Inch
  • Product Projection: 2-13/16 Inch
  • Electric Options: Latchbolt Monitor
  • Features: Simple User Selectable Fail Safe/Fail Secure Operation in Motor Controlled Locks; Continuous Duty Rated; Low Power Consumption; Interface With Life Safety Systems
  • Strike Type: Curved Lip
  • Backset: 2-3/4 Inch
  • Warranty: 3 year mechanical
  • Rose/Escutcheon Length: 2-1/8 Inch
  • Lever Size: 4-3/4 Inch
  • Strike Lip: 1-3/16 Inch

ACSI-M1510M-AE-1-L9070L ELECTRIFIED MORTISE LOCKS AVAILABLE CONFIGURATION

ACSI M1510M-AE-1-L9070L Schlage L Series Office, Entry Mortise Lever Lock Fail Safe Motor Controlled Authorized Egress
ACSI M1510M-AE-1-L9070L-03A-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 03 Lever Design, A Rose Design
ACSI M1510M-AE-1-L9070L-03L-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 03 Lever Design, L Rose Design
ACSI M1510M-AE-1-L9070L-06A-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 06 Lever Design, A Rose Design
ACSI M1510M-AE-1-L9070L-06L-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 06 Lever Design, L Rose Design
ACSI M1510M-AE-1-L9070L-07A-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 07 Lever Design, A Rose Design
ACSI M1510M-AE-1-L9070L-07L-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 07 Lever Design, L Rose Design
ACSI M1510M-AE-1-L9070L-17A-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 17 Lever Design, A Rose Design
ACSI M1510M-AE-1-L9070L-17L-626 Schlage L Series Mortise Lock Fail Safe Authorized Egress 17 Lever Design, L Rose Design

Product Specs

Series:
1500 Series
Collection:
1500 Series
Product Type:
Electronic Mortise Locks
Features:
Simple User Selectable Fail Safe/Fail Secure Operation in Motor Controlled Locks, Continuous Duty Rated, Low Power Consumption, Interface With Life Safety Systems
Warranty:
3 Year Mechanical
Subcategory:
Electrified Mortise Locks
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Type:
Mortise
Handle Type:
Lever
Fail-safe / Fail-secure:
Field Selectable
Product Group:
Mechanical Locks
Product Subgroup:
Mortise Locks and Trim
Product Voltage:
12VAC/DC/24VDC/24VAC
Door Hand Direction:
Field Reversible
Electrical Configuration:
Request to Exit
Product Category:
Mechanical Locks
Department:
Door Hardware

ACSI ACSI-M1510M-AE-1-L9070L-03A-626 – Frequently Asked Questions

1) Will an ACSI M1510M electrified mortise lock unlock automatically if the building loses power?
Yes, that's the point of the fail safe setup. The M1510M-AE-1-L9070L holds the outside trim locked while power is applied and releases it when power is removed, so a power failure drops the lockset to passage and the door opens from both sides. Energized, it behaves as a storeroom function. If you need the opposite behavior on some openings, the motor controlled lock is field selectable between fail safe and fail secure, so the same part can be set either way on site.
2) What door prep and backset does the ACSI M1510M-AE-1-L9070L mortise lock need?
It's a 2-3/4 inch backset mortise lock for a 1-3/4 inch door, and that thickness is the only one stated for it, so it isn't a 1-3/8 inch door part. The case measures 4-7/16 x 6-1/16 x 1 inches and the front is 1-1/4 x 8 x 7/32 inches. Trim projects 2-13/16 inches off the face with a 2-1/8 inch rose. Lever to cylinder spacing is 3-7/8 inches, lever to thumbturn hub 2-11/16 inches. If you're cutting a new pocket or checking an existing Schlage L prep, those are the numbers to measure against.
3) Will this ACSI electrified mortise lock latch into the strike already in my frame?
The latchbolt throws 3/4 inch and the lock ships against a 4-7/8 x 1-1/4 inch curved lip strike with a 1-3/16 inch lip. If your frame already carries an ANSI 4-7/8 inch strike, which is the standard commercial mortise strike cutout, the existing prep takes it. A smaller T-strike or a residential-size strike will not, and you'd be filling and re-prepping the jamb. Measure the lip too, since 1-3/16 inches is what suits the jamb stop depth on a typical hollow metal frame.
4) Does the ACSI M1510M mortise lock come with a cylinder?
No. It's supplied less conventional cylinder, so you order the mortise cylinder separately and key it into whatever system the building runs. That's usually what you want on a retrofit, since it lets the lock join an existing keyway and masterkey system rather than forcing a new one. Plan on a mortise cylinder with the cam the Schlage L Series trim takes, and note the lever-to-cylinder spacing is 3-7/8 inches.
5) What voltage and current does the ACSI M1510M-AE electrified mortise lock draw?
It runs on 12 to 24V, AC or DC, drawing 250mA inrush and 10mA holding. That 10mA hold is low enough that a modest access control power supply can carry a bank of these openings, and the lock is continuous duty rated so it can sit energized indefinitely. Size the supply off the inrush figure, not the holding figure, since several locks releasing and re-latching together is where a thin supply gets into trouble.
6) What does Authorized Egress mean on an ACSI 1500 Series mortise lock?
Authorized Egress is a request to exit signal built into the lock. Turning the inside lever to leave sends an RX output to the access control panel, so the system knows the exit was legitimate and doesn't log it as a forced door or trip an alarm. On the M1510M-AE that's paired with mechanical free egress, the inside lever always retracts the latch, so nobody is ever locked in. Integrators tie the RX contact into the panel input and the lock also interfaces with life safety systems for fire alarm release.
7) Is the ACSI M1510M-AE mortise lock rated for a fire door and does it meet ADA?
Yes on both. It's UL Listed and tested to UL 10C and CAN/ULC-S104 for fire door assemblies, and it carries California State Fire Marshal approval. It's ANSI/BHMA A156.13-2017 Series 1000, Grade 1 for both operational and security, plus ASTM F476-76 Grade 40. For accessibility it complies with ICC A117.1 and is listed ADA compliant, and the lever trim is what gets you there, since a lever needs no tight grasping or wrist twisting to operate.
8) Will an ACSI M1510M drop into a door already prepped for a Schlage L Series mortise lock?
That's how it's built. The M1510M-AE-1-L9070L is a Schlage L Series classroom mortise lock modified by ACSI for fail safe motor controlled operation with authorized egress, so it carries the L Series case and trim geometry: 2-3/4 inch backset, 1-1/4 x 8 x 7/32 inch front, 4-7/8 x 1-1/4 inch strike. On a 1-3/4 inch door already running L Series hardware the mechanical prep is the same. What's new is the wiring, you'll need power transfer through the hinge or an electric hinge and a run back to the supply, which a mechanical lock never needed.
9) Do I have to specify handing when I order an ACSI M1510M mortise lever lock?
No. The lock is field reversible, so one part number covers left and right hand openings and you set the hand during installation. For a property manager or contractor stocking spares across a building, that means one SKU on the shelf instead of two, and no wrong-hand returns when a door turns out to swing the other way.
10) Which lever and rose designs can I get on the ACSI M1510M-AE-1-L9070L, and what finish?
Four Schlage L Series lever designs, 03, 06, 07 and 17, each available with either the A rose or the L rose, for eight combinations in all. Every one is satin chrome, which is the 626 finish. Lever size is 4-3/4 inches. Pick the design that matches the other trim in the building, since the lever shape is the part anyone actually sees and mismatched levers down a corridor are the usual complaint on a phased retrofit.
11) Should I use a fail safe electrified mortise lock or a fail secure one on a stairwell or exit door?
Fail safe is the one you want where people must be able to get through on a power loss, stairwell re-entry doors and doors on a fire alarm release being the usual cases, because removing power unlocks the outside trim. Fail secure is for openings where the door must stay locked when power drops, like an exterior perimeter door or a drug room. The M1510M is motor controlled with user selectable fail safe or fail secure operation, so you aren't committed at the order stage, you set it in the field. Check your local code for the opening first, because stair doors and fire rated assemblies are where the requirement is written down.
12) Can I monitor whether the door is actually latched with the ACSI 1500 Series mortise lock?
Latchbolt monitoring is available as an electric option on the M1510M. It reports the latchbolt position back to the access control system, so the panel can tell a door that closed and latched from one that was pushed to but never caught. Worth specifying on any opening you're alarming, because door position alone won't catch a latch that failed to throw.
13) What is the latchbolt made of on the ACSI M1510M mortise lock, and will it hold up on a high traffic door?
Stainless steel latch with an anti-friction tongue. The anti-friction tongue is what keeps the bolt from dragging on the strike lip as the door closes, which is what saves a latch on a door that gets slammed a few hundred times a day or sits under a closer that's cranked down. Paired with the ANSI/BHMA Grade 1 operational and security rating and continuous duty electrical rating, it's built for commercial traffic rather than light-duty use.
How fast can I get the ACSI ACSI-M1510M-AE-1-L9070L-03A-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ACSI ACSI-M1510M-AE-1-L9070L-03A-626 come with a warranty?
Absolutely. The ACSI ACSI-M1510M-AE-1-L9070L-03A-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ACSI ACSI-M1510M-AE-1-L9070L-03A-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ACSI ACSI-M1510M-AE-1-L9070L-03A-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!