ACSI M1520M-AE-1-8205 Sargent ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,060.40
$725.82
ACSI ACSI M1520M-AE-1-8205 Sargent 8200 Series Office, Entry Mortise Lock Body Fail Secure With Authorized Egress ACSI-M1520M-AE-1-8205

ACSI M1520M-AE-1-8205 Sargent 8200 Series Office, Entry Mortise Lock Body Fail Secure With Authorized Egress

(No reviews yet) Write a Review

Model: ACSI-M1520M-AE-1-8205-26D
From the 1500 Series Collection
$1,060.40
$725.82
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,060.40
$725.82
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ACSI M1520M-AE-1-8205 SARGENT 8200 SERIES OFFICE, ENTRY MORTISE LOCK BODY FAIL SECURE WITH AUTHORIZED EGRESS OVERVIEW

M1520M-AE-1-8205 Sargent 8200 Series Office, Entry Mortise Lock Body Fail Secure With Authorized Egress.

Sargent 8200 Series Office or Entry Mortise Lock Body Modified with Fail Secure Operation (Power Unlock), Authorized Egress (Request to Exit), Standard Control Locks Outside (Secure Side) Trim, Motor Controlled.

ACSI Series 1500 Electric Mortise Locks provide safety and security for stairtower doors or controlled areas where both locking and latching are required. The locks are available in motor-controlled or solenoid-controlled to allow remote electric locking or unlocking while conforming to life-safety codes.

Buy the ACSI M1520M-AE-1-8205 Sargent 8200 Series Office, Entry Mortise Lock Body Fail Secure And Authorized Egress for easy installation and dependable door hardware solution.

ACSI M1520M-AE-1-8205 SARGENT 8200 SERIES OFFICE, ENTRY MORTISE LOCK BODY FAIL SECURE WITH AUTHORIZED EGRESS PRODUCT FEATURES

  • Function: 1520M-Fail Secure Control
  • Product Type: Electronic Mortise Lock
  • Door Thickness: 1-3/4 inch
  • Latch Throw: 3/4 Inch
  • Electric Options: Latchbolt Monitor
  • Strike Type: Curved Lip
  • ADA Compliant: YES
  • Strike Size: 4-7/8" x 1-1/4"
  • Hub Material: Cold Forged Steel
  • Standards: UL Listed; California State Fire Marshall Approved; ANSI/BHMA A156.13 Series 1000 Operational Grade 1 and Security Grade 1 with All Standard Trims; UL and cUL Listed; ANSI/UL 10C, Positive Pressure Fire Test of Door Assemblies
  • Case Dimensions: 7/64" Thick
  • Function Description: Outside Trim is Unlocked When Power is Applied and Locked When Power is Removed. Lockset will Lock in the Event of a Power Failure
  • Front Size: 8" x 1-1/4"
  • Function Family: Fail Secure
  • Strike Lip: 1-1/4 Inch
  • Minimum Stile Width: 4-3/4 Inch
  • Electrified Features: 12/24V at 250mA Inrush, 10mA Holding
  • Features: Simple User Selectable Fail Safe/Fail Secure Operation in Motor Controlled Locks; Continuous Duty Rated; Low Power Consumption; Interface With Life Safety Systems
  • Voltage: 12 to 24VAC/VDC
  • Grade: ANSI/BHMA Grade 1
  • Application: Fire Doors
  • Backset: 2-3/4 Inch
  • Warranty: 10 Year
  • Manufacturer Parent: ACSI
  • Latchbolt Size: 5/8" x 1"
  • Latchbolt Type: One Piece Anti-Friction Reversible Latch

ACSI-M1520M-AE-1-8205 ELECTRIFIED MORTISE LOCKS AVAILABLE CONFIGURATION

ACSI M1520M-AE-1-8205 Sargent 8200 Series Office, Entry Mortise Lock Body Fail Secure With Authorized Egress
ACSI M1520M-AE-1-8205-10 Sargent 8200 Series Mortise Lock Fail Secure Authorized Egress 10 - Satin Bronze
ACSI M1520M-AE-1-8205-10B Sargent 8200 Series Mortise Lock Fail Secure Authorized Egress 10B - Oil Rubbed Dark Bronze
ACSI M1520M-AE-1-8205-26 Sargent 8200 Series Mortise Lock Fail Secure Authorized Egress 26 - Bright Polished Chrome
ACSI M1520M-AE-1-8205-26D Sargent 8200 Series Mortise Lock Fail Secure Authorized Egress 26D - Satin Chrome
ACSI M1520M-AE-1-8205-3 Sargent 8200 Series Mortise Lock Fail Secure Authorized Egress 3 - Bright Polished Brass

Product Specs

Series:
1500 Series
Collection:
1500 Series
Product Type:
Electronic Mortise Locks
ADA Compliant:
No
Features:
Motor Controlled, 12/24 V Operation, Low Power Consumption, Lockset will Lock in the Event of a Power Failure
Subcategory:
Electrified Mortise Locks
Commercial/Residential:
Commercial
UL Listing Type:
UL Listed, California State Fire Marshall Approved, Continuous Duty Rated
Lock Type:
Mortise
Electronic:
Yes
Compatibility:
Sargent 8200 Series Office or Entry Mortise Lock
Lock Function:
Entrance
Product Group:
Mechanical Locks
Product Subgroup:
Mortise Locks and Trim
Product Function:
Entrance
Product Category:
Mechanical Locks
Department:
Door Hardware

ACSI ACSI-M1520M-AE-1-8205-26D – Frequently Asked Questions

1) Will the ACSI M1520M-AE lock body drop into an existing Sargent 8200 mortise prep?
It is a Sargent 8200 Series Office or Entry mortise lock body that ACSI modifies for electric control, so it works in a standard 8200 pocket with a 2-3/4 inch backset and an 8 x 1-1/4 inch front. Door thickness is 1-3/4 inch and minimum stile width is 4-3/4 inch. You will need to run wire to the lock through an electric hinge or power transfer, which a purely mechanical 8200 prep does not have.
2) Will this electric mortise lock latch into the strike already in my frame?
The lock throws a 3/4 inch latchbolt sized 5/8 x 1 inch, and it is supplied against a curved lip strike measuring 4-7/8 x 1-1/4 inches with a 1-1/4 inch lip. If your existing frame carries that same ANSI curved lip strike, it will latch. A T-strike or a deep-pocket strike from another manufacturer should be swapped for the matching curved lip strike.
3) Can I use the ACSI 1500 Series electric mortise lock on a fire rated door?
Yes. The application is fire doors, and the lock is UL and cUL Listed, California State Fire Marshal approved, and tested to ANSI/UL 10C positive pressure fire test of door assemblies. Because it is fail secure, the opening stays latched and locked on the outside during a power loss, which is what a rated stair or corridor door needs.
4) What is included, and what else do I need to order to finish this opening?
What you get is the electrified mortise lock body itself, modified for fail secure motor control with Authorized Egress, in the 1 locking configuration where standard control locks the outside secure side trim. Levers or knobs, roses or escutcheons, and the cylinder are separate Sargent 8200 trim items, and you still need an electric hinge or door loop to get 12/24V into the door plus a power supply.
5) What power supply do I need for the ACSI M1520M electrified mortise lock?
It runs on 12 to 24VAC or VDC, drawing 250mA inrush and only 10mA holding, and it is continuous duty rated. That holding current is low enough that a single small access control power supply can carry several openings. Size the supply for the inrush of all locks that could pull at once.
6) What is the difference between the motor controlled ACSI 1500 Series lock and a solenoid controlled electric mortise lock?
ACSI builds the 1500 Series in both. The M1520M here is the motor controlled version: it draws power only while the motor moves, which is why holding current is 10mA, and it lets you flip between fail safe and fail secure in the field. A solenoid version holds current continuously to stay in state and is fixed to one mode. For stairtowers and controlled areas where the lock sits energized all day, motor control is the low draw choice.
7) Is the ACSI M1520M-AE rated for high traffic commercial openings?
It is a commercial lock certified to ANSI/BHMA A156.13 Series 1000, Operational Grade 1 and Security Grade 1 with all standard trims, which is the top mortise lock grade. The hub is cold forged steel and the latch is a one piece anti-friction reversible latch, so it handles either hand without a parts change.
8) Does the handing of the door matter when ordering this ACSI mortise lock body?
No separate handed part is needed. The latch is a one piece anti-friction reversible latch, so you reverse it on the job for left or right hand doors. What you do need to confirm is the 1-3/4 inch door thickness and at least a 4-3/4 inch stile.
9) Can I monitor whether the door is actually latched from my access control panel?
Yes. The lock offers a latchbolt monitor as an electric option, and the Authorized Egress feature reports when the inside lever is used as a request to exit. Between the two, the head end sees both secure status and legitimate egress, and the series is built to interface with life safety systems.
10) What finishes does the ACSI M1520M-AE-1-8205 mortise lock come in?
Five: 605 bright brass, 613 satin bronze oil-rubbed, 625 bright chrome, 626 satin chrome, and 10A satin bronze blackened. If you are standardizing a building, 626 satin chrome is the usual match for existing Sargent 8200 openings.
How fast can I get the ACSI ACSI-M1520M-AE-1-8205-26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ACSI ACSI-M1520M-AE-1-8205-26D come with a warranty?
Absolutely. The ACSI ACSI-M1520M-AE-1-8205-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ACSI ACSI-M1520M-AE-1-8205-26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ACSI ACSI-M1520M-AE-1-8205-26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!