You may also like
AL 1CNDTR 2HOLE MOUNT 500-1000
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Dual-Rated Mechanical Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Surface Finishing:
- Tin-Plated
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Aluminum
Blackburn ADR99-12D – Frequently Asked Questions
1) Can the Blackburn ADR99-12D be used on copper conductors, or aluminum only?
The ADR99-12D is a dual-rated mechanical connector, so it is rated for both aluminum and copper conductors. The body is aluminum with a tin-plated surface, which is what lets it land copper without the galvanic issues a bare aluminum lug would create.
2) What is the conductor size range on the Blackburn ADR99-12D?
It covers 500 kcmil through 1000 kcmil, which is why it is described as a 500-1000 lug. That puts it in service-entrance and large feeder territory rather than branch circuit work.
3) Is the ADR99-12D a one-hole or two-hole lug?
Two-hole mount. That matters for the pad you are landing on: the bus or equipment pad needs two tapped or drilled holes on the matching spacing, and two-hole is what many specs call for on large feeders to keep the lug from rotating under load.
4) How many cables does the Blackburn ADR99-12D lug take?
One. The ADR99-12D is a single-conductor lug, so each cable landing needs its own connector. For a multi-cable termination on one pad you would order one per run.
5) Is the Blackburn ADR99-12D UL listed?
Yes, it carries UL file E9809. If your inspector or spec requires a listed connector for the aluminum or copper feeder termination, that is the reference to cite.
6) Do I order Blackburn ADR99-12D lugs individually or in a box?
They sell each, so you buy exactly the count your terminations call for. Remember it is one conductor per lug when you total up a three-phase plus neutral landing.
7) What part number should I give my distributor for this Blackburn two-hole aluminum lug?
Order it as Blackburn ADR99-12D. That is the manufacturer part number for the tin-plated aluminum, dual-rated, two-hole, single-conductor 500-1000 kcmil connector. Product of Mexico.
How fast can I get the Blackburn ADR99-12D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ADR99-12D come with a warranty?
Absolutely. The Blackburn ADR99-12D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ADR99-12D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ADR99-12D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.