You may also like
AL 5-3/8IN TENSION COMP SPLICE 336
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice
- Selling Unit Of Measure:
- each
- Standards:
- ANSI C119.4
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 5-3/8 inch
- Installation Category:
- None
Blackburn ACJ336 – Frequently Asked Questions
1) What conductor does the Blackburn ACJ336 aluminum compression splice fit?
The ACJ336 is sized for 336 conductor, which in the trade means 336.4 kcmil aluminum. It joins two conductor ends, so it is a straight inline splice rather than a tap or a tee. The body is aluminum, so it is intended for aluminum conductor, and the crimped joint is the only connection method here.
2) Is the ACJ336 a full tension splice or just an electrical joint?
It is a tension compression splice, so it is built to carry mechanical load across the joint, not only current. That is what you want on a span or anywhere the conductor is pulled, as opposed to a jumper or a slack connection in a cabinet where mechanical strength is not the issue.
3) Does the ACJ336 splice meet a recognized connector standard for a utility or spec job?
The ACJ336 is built to ANSI C119.4, the standard covering connectors for use between aluminum and copper conductors. If the drawing or the utility spec calls out C119.4 on splices, this one answers it.
4) Do I need a specific crimp tool and die for the ACJ336 splice?
Yes. The ACJ336 is a compression connector, so it is installed with a hydraulic or battery crimp tool and the correct die, not with bolts or set screws. There is no mechanical option on this part, and a compression joint is permanent once crimped.
5) Does the Blackburn ACJ336 splice come insulated?
No insulation. The ACJ336 is a bare aluminum barrel, so if the splice needs covering for the application you are adding tape, a cover, or heat shrink separately.
6) How much room do I need to make up an ACJ336 splice?
Allow for a 5-3/8 inch barrel plus tool clearance at both ends. That length matters in a tight pull box or close to a deadend, because the crimp head has to seat squarely on the barrel through the full sequence of crimps.
7) Is the Blackburn ACJ336 sold individually or in a bag?
Sold each. One ACJ336 makes one splice, so count a piece per conductor joint and add spares, since a miscrimped compression barrel is cut out rather than reworked.
How fast can I get the Blackburn ACJ336 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ACJ336 come with a warranty?
Absolutely. The Blackburn ACJ336 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ACJ336?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ACJ336 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.