You may also like
AL DUALRATE EXTR LUG No6-350 1/2
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Dual-Rated Mechanical Connector
- Selling Unit Of Measure:
- each
- Spacing:
- 1/2 in
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
Blackburn ADR352 – Frequently Asked Questions
1) Can the Blackburn ADR352 lug be used on both aluminum and copper conductors?
Yes. The ADR352 is a dual-rated mechanical connector, so it is rated for aluminum as well as copper conductors. That is what lets one part number cover a panel where the feeders are aluminum and the branch or ground runs are copper, instead of stocking two separate lugs.
2) What wire sizes does the Blackburn ADR352 lug accept?
The ADR352 covers a range of No. 6 AWG through 350 kcmil in a single barrel. One lug handles everything from a small feeder tap up to a 350 kcmil service conductor, which is why it gets specified for panelboard and transformer terminations where the conductor size is not final at the time of order.
3) How many conductors does the Blackburn ADR352 terminate?
One. The ADR352 is a single-conductor lug, so each cable getting landed needs its own lug. If you are terminating a four-wire feeder you are buying four of them, and they are sold individually rather than in a kit.
4) What is the 1/2 inch dimension on the Blackburn ADR352 lug?
The ADR352 carries a 1/2 inch spacing figure, which is the mounting dimension you match to the bus or pad you are landing on. Check it against the existing hole pattern before you order, because a mismatch there is the usual reason a lug of the right wire range still will not bolt up.
5) Is the Blackburn ADR352 a compression lug or a mechanical lug?
Mechanical. The ADR352 is a set-screw type mechanical connector, so it lands with a hex wrench and needs no crimp tool, dies or press. For service work and retrofits where you are not carrying a hydraulic crimper, that is the practical difference from a compression lug, which needs the matching die set to be a listed termination.
6) Where is the Blackburn ADR352 lug made?
Country of origin on the ADR352 is Mexico. That is the detail institutional and government buyers usually need for domestic-preference or procurement documentation on a bid package.
How fast can I get the Blackburn ADR352 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ADR352 come with a warranty?
Absolutely. The Blackburn ADR352 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ADR352?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ADR352 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.