You may also like
AL HTYPE COMP CONN 2/0ASCR 3/0-2/0
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- H-Type Compression Tap Connector
- Selling Unit Of Measure:
- each
- Standards:
- RUS Accepted. Complies with ANSI C119.4 Specifications
- Temperature Range:
- up to 90 °C
- Type2:
- Wire connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 1-7/8 inch
- Installation Category:
- None
Blackburn WR229 – Frequently Asked Questions
1) What conductor sizes does the Blackburn WR229 H-tap connector take?
The WR229 is sized for a 2/0 ACSR main run with a 3/0 through 2/0 tap. It's a two-conductor connector, so one main and one tap per crimp. If your main is a different size or you need a smaller tap range, you need a different WR-series die/connector combination rather than this one.
2) Can I use the WR229 on aluminum ACSR overhead conductor?
Yes, it's an aluminum bodied H-tap intended for ACSR, with the main rated at 2/0 ACSR. Aluminum bodied H-taps of this type are used on aluminum and ACSR conductor; for copper to copper taps you want a copper bodied C or H tap instead.
3) Does the Blackburn WR229 meet utility specs for distribution work?
It is RUS accepted and complies with ANSI C119.4, which is the standard utility line crews and co-ops reference for connectors on electric distribution conductors. That is the spec most rural utility and municipal jobs call out on the drawing.
4) Is the WR229 a compression crimp connector or a mechanical bolted tap?
It's a compression fitting, installed with a hydraulic or battery crimp tool and the matching die, not a bolted mechanical tap. Once crimped it's permanent, so it's used where you want a maintenance free tap rather than one you may want to open again later.
5) What temperature can this H-tap connector run at?
Rated for conductor operating temperatures up to 90 C, which covers standard 90 C rated distribution and building feeder conductor.
6) Is the WR229 insulated, and do I need to cover it after crimping?
The body is bare, with no insulation supplied. On any installation that isn't open overhead line work you'll need to insulate the finished tap yourself, typically with heat shrink or a cover kit ordered separately.
7) How long is the WR229 connector body, and will it fit in a tight crossarm or enclosure space?
The body measures 1-7/8 inch in length. That's the dimension to check against your available working clearance, since a crimp tool head needs room around the connector on top of the body length itself.
8) Is the WR229 sold individually or in a bag?
Sold each, so quantity ordered equals connectors received. Line crews stocking a truck should order one per tap plus spares, since a miscrimped compression connector can't be reused.
How fast can I get the Blackburn WR229 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn WR229 come with a warranty?
Absolutely. The Blackburn WR229 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn WR229?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn WR229 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.