You may also like
AL MULTI BOTHSIDE CONN 4PORT 500-6
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire & Cable Management
- Product Type:
- Multi-Tap/Port Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809, CSA 6591
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTD50064 – Frequently Asked Questions
1) What conductor sizes does the Blackburn AMTD50064 multi-tap connector accept?
The AMTD50064 is a 500-6 range connector, meaning each port takes conductors from 500 kcmil down to 6 AWG. That covers a service entrance main and the smaller feeder or branch taps coming off it in the same block, so you are not stacking two different connectors in one enclosure.
2) How many taps can I land on the Blackburn AMTD50064, and are the ports on one side or both?
Four ports, with openings on both sides of the block. That both-side arrangement lets you bring conductors in from opposing directions instead of routing everything to one face, which matters in a tight gutter or pull box where bend radius is the limiting factor.
3) Does the Blackburn AMTD50064 carry UL and CSA approvals for inspection?
It is listed under UL E9809 and CSA 6591, so it will satisfy an inspector looking for a listed tap connector on both sides of the border.
4) Is this Blackburn tap connector rated for 600 volt service and utility work?
Yes, the AMTD50064 carries a 600 V rating, which covers the usual commercial and industrial feeder, service, and panel applications up to 600 volts.
5) Is the AMTD50064 connector body aluminum or copper, and can I use it on aluminum conductors?
The body is aluminum, which is what makes it suitable for aluminum conductors rather than being limited to copper-only runs. Standard practice with an aluminum-bodied tap is to abrade the aluminum conductor and apply joint compound before torquing the setscrews.
6) Do I get one connector or a pack when I order the Blackburn AMTD50064?
It sells each, so one four-port block per unit. If you are landing taps at several points in a gutter, count your blocks and order that quantity.
7) Is the Blackburn AMTD50064 made in the USA?
Country of origin is the United States, which is the answer government and institutional buyers with domestic-preference requirements on their purchase order are usually after.
8) Is the AMTD50064 an insulated tap block or a bare connector?
It is a black aluminum multi-tap connector body. Treat it as a live part once energized and insulate or enclose it per the installation, the same as any bare tap block.
How fast can I get the Blackburn AMTD50064 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTD50064 come with a warranty?
Absolutely. The Blackburn AMTD50064 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTD50064?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTD50064 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.