Altronix ALTV1224C CCTV Combin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$613.66
$481.99

Altronix ALTV1224C CCTV Combination AC and DC Wall Mount, Input 115VAC 50/60Hz at 1.52A, (8) 12VDC Fuse Protected Ouptuts, (8) 24VDC Fuse Protected Outputs, Grey Enclosure

(No reviews yet) Write a Review

Model: ALTV1224C

In Stock (leaves warehouse same day if ordered before 3pm ET)

$613.66
$481.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
4A
Features:
Provides Both 12VDC and 24VAC Outputs where a Combination of Both AC and DC Outputs are Required
Includes:
Includes Enclosure, 16 Fused Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix ALTV1224C – Frequently Asked Questions

1) How many outputs does the Altronix ALTV1224C have, and are they individually fused?
Sixteen fused outputs come with the ALTV1224C, and the grey wall mount enclosure is included in the box. Each output is fuse protected, so a shorted camera run or a failed device drops that one circuit instead of taking the whole supply offline. That is the practical reason integrators pick a multi-output unit over several small plug-in supplies: one 120V feed at the head end, sixteen protected runs out.
2) Can one power supply run both AC and DC cameras on the same job?
That is exactly what the ALTV1224C is built for. It supplies both AC and DC outputs from a single unit, for sites where some devices need AC and others need DC. On a mixed camera fleet, typical of a building that has been added to over the years, it saves running two separate supplies and two separate 120V circuits.
3) How much total current does the Altronix ALTV1224C deliver?
Rated at 4A. Budget your camera loads against that number before you assign outputs, because sixteen fused outputs does not mean sixteen full-draw devices. Add the current draw of every camera you intend to hang on it, add headroom for IR illuminators that pull hardest at night, and if you land above 4A split the load across a second supply.
4) What is the closest alternative to the Altronix ALTV1224C if I need eight fused 12/24VDC outputs for access control?
The RCI DKPS-2A is the nearest multi-output peer: it provides 8 outputs at 12/24VDC rated 2A for access control systems. The difference is output style - the ALTV1224C is a combination AC and DC unit with 16 fused outputs total, eight 12VDC and eight 24VDC, so DC-only devices are all the DKPS-2A can feed, while the ALTV1224C is built for jobs where a combination of both AC and DC outputs are required.
5) What input circuit do I need to feed the ALTV1224C?
Standard 120V line power. Plan a dedicated 120V branch circuit at the equipment rack or head-end wall where the enclosure mounts, then land your low voltage runs at the fused outputs inside.
6) What are the alternatives to the Altronix ALTV1224C for powering access control locks rather than cameras?
The ALTV1224C is a combination AC and DC multi-output unit sized for camera and mixed device loads at 4A. If the job is electrified locks and access control instead, look at the RCI DKPS-2A, which gives eight outputs at 12/24VDC and 2A, or the Von Duprin PS902 base power supply at 2A, 12/24VDC field selectable. For delayed egress exit devices specifically, the BEST PS161-6 runs 120V in, 12/24V out at 6A. Motorized latch retraction devices need their own inrush-capable supply such as the BEST RPSMLR2.
7) I need battery backup on my camera power. Does the ALTV1224C provide it?
The ALTV1224C is a combination AC and DC output supply in a grey enclosure, sixteen fused outputs, 4A, fed from 120V. If standby battery operation is a requirement for your site, choose a unit that states it: the Adams Rite PS-1 is a 1 amp 12/24VDC regulated supply with battery backup, the Command Access PS204/204B gives 2A at 24VDC with battery backup, and the Detex 10-800 universal logic controller ships with a 120VAC/24VDC supply and battery backup.
8) I need more than 4 amps for a large camera count. What should I use instead?
The ALTV1224C tops out at 4A, so a large IR camera count will outrun it. For heavier DC loads we carry the Securitron AQS1210 switching supply at 12VDC and 10 amps, and the BEST PS161-6 at 6A with 12/24V output. Another common approach is two ALTV1224C units splitting the camera fleet, which also keeps one failure from blacking out every camera on the site.
9) I only need to power one or two DC devices - is there something smaller than the ALTV1224C?
Yes. For a single device, the Securitron AQD1 is a switching power supply at 12/24 VDC 1 Amp, the SDC 620 Series is a 1 amp regulated and filtered low voltage supply with dual voltage selection, and the Command Access PS1 Series is a 24VDC linear supply with 1 amp output. The ALTV1224C is scaled for multi-camera and multi-device jobs with 16 fused outputs and a 4A current rating.
10) Which power supply in this class is UL listed for a 12V DC access control kit?
The Aiphone AC-PS1250 is a 12V DC 5A UL listed supply made for AC Series access control kits, so it is the direct choice when the kit specifies it. The Altronix ALTV1224C is a broader wall mount unit supplying eight fused 12VDC and eight fused 24VDC outputs from a 120V input, used where several devices at two different voltages are fed from one enclosure.
11) Would a Von Duprin PS902 substitute for the ALTV1224C?
Only on small jobs. The Von Duprin PS902 is a Grade 1 base power supply at 2A, 12/24 VDC field selectable for access control - a single field-selectable DC output. The ALTV1224C instead delivers both voltages at once across 16 fused outputs, eight at 12VDC and eight at 24VDC, which is what a mixed AC and DC device list needs.
12) What looks like a power supply in this group but will not replace the ALTV1224C?
Two items sit nearby and do a different job. The ROFU 10305-LA/10306-LA is a tamper resistant power transfer hinge rated 1.5A at 42V - it carries power through the door, it does not generate it. The Command Access CAT Field Tester is a portable 12-24VDC unit that runs off DeWalt, Makita and Milwaukee batteries for bench and field testing. Neither is a substitute for a fixed 120V wall mount supply feeding 16 fused outputs.
13) Is the ALTV1224C meant for commercial installations or home use?
Commercial. It is a wall mount, enclosure-based unit intended for professional security and access control head-end work, not a plug-in transformer for a residential camera or two. For a single small device, a plug-in supply like the ROFU 9126T mini power supply is the simpler answer.
14) Do I need to buy a separate enclosure or mounting box for the ALTV1224C?
No. The grey enclosure is part of the unit, so it mounts straight to the wall at the head end with no extra can to order. Budget only for the 120V feed, your fuses if you plan spares, and the low voltage cable.
15) Is a ROFU 9126T plug-in supply an equivalent to the ALTV1224C?
No. The ROFU 9126T is a plug in mini power supply rated 12 VDC at 1.5A with a built-in time delay - a single-device unit for one strike or lock. The ALTV1224C is a wall mount commercial unit fed from 120V with an enclosure and 16 fused outputs, so it serves a whole rack of cameras or devices rather than one opening.
16) I need a mid-range regulated DC supply between 1.5 and 2 amps - what are the options alongside the ALTV1224C?
The SDC 631 Series is a 1.5 amp regulated and filtered DC power controller with dual voltage selection, the SDC 632 Series is the 2 amp version, and the Command Access PS210 is a UL 6E/CSA linear supply at 1.5A at 24VDC with boost circuitry. Each feeds DC only; the ALTV1224C is the choice when the device list includes both AC and DC loads from one grey enclosure.
How fast can I get the Altronix ALTV1224C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix ALTV1224C come with a warranty?
Absolutely. The Altronix ALTV1224C is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix ALTV1224C?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix ALTV1224C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.