Amerex MP Series Multi-Purpose...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$98.46

Amerex MP Series Multi-Purpose ABC Dry Chemical Fire Extinguisher

(No reviews yet) Write a Review

Model: MP5

In Stock (leaves warehouse same day if ordered before 3pm ET)

$98.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Amerex MP Series Multi-Purpose Dry Chemical Fire Extinguisher

The Amerex MP Series is a line of multi-purpose ABC dry chemical fire extinguishers available in 2.5, 5, 5A, 6, 10, and 20 lb capacities. Each unit uses a specially fluidized and siliconized mono ammonium phosphate agent that smothers Class B flammable liquid fires, fuses and insulates Class A ordinary combustibles, and provides non-conductive suppression for Class C electrical fires. Aluminum cylinder construction keeps weight low for easier handling and mounting. All models are UL Listed and ULC Listed and conform to ANSI/UL 299, ANSI/UL 711, CAN/ULC-S504, and CAN/ULC S508.

UL Ratings by Model

Model Capacity UL Rating Class A Class B:C
MP2.5 2.5 lb 1A-10B:C 1A 10B:C
MP5 5 lb 2A-10B:C 2A 10B:C
MP5A 5 lb 3A-40B:C 3A 40B:C
MP6 6 lb 2A-10B:C 2A 10B:C
MP10 10 lb 4A-60B:C 4A 60B:C
MP20 20 lb 10A-120B:C 10A 120B:C

Verify final UL ratings on the product label and Amerex data sheet for your specific model before code submittal.

Key Features

  • ABC Multi-Class Protection — single agent covers ordinary combustibles (A), flammable liquids (B), and energized electrical equipment (C)
  • Mono Ammonium Phosphate Agent — specially fluidized and siliconized for consistent discharge and effective fire knockdown
  • Aluminum Cylinder — corrosion-resistant, lightweight construction; easier to mount and handle than steel-cylinder alternatives
  • Wide Operating Temperature — rated from -65°F (-53°C) to 120°F (49°C); suitable for unheated storage areas, vehicle mounting, and outdoor enclosures
  • Non-Conductive Agent — safe for use on energized electrical equipment without conducting electricity during discharge
  • UL Listed / ULC Listed — conforms to ANSI/UL 299, ANSI/UL 711, CAN/ULC-S504, CAN/ULC S508

Technical Specifications

  • Agent: Multi-Purpose Dry Chemical (mono ammonium phosphate)
  • Cylinder Material: Aluminum
  • Operating Temperature: -65°F (-53°C) to 120°F (49°C)
  • Fire Classes: A, B, C
  • Test Standards: ANSI/UL 299, ANSI/UL 711, CAN/ULC-S504, CAN/ULC S508
  • Available Capacities: 2.5, 5, 5A, 6, 10, 20 lb

Typical Applications

  • Commercial and office buildings — NFPA 10 travel-distance compliance
  • Industrial and manufacturing facilities with mixed Class A/B/C hazards
  • Electrical rooms, server rooms, and panel areas
  • Fleet vehicles, service trucks, and construction equipment
  • Multi-family residential and hospitality properties
  • Schools, healthcare facilities, and institutional buildings

MP5 vs. MP5A — Which 5 lb Model Do You Need?

Both models weigh 5 lb and share the same dimensions, agent, and construction. The difference is UL rating: the MP5 is rated 2A-10B:C, while the MP5A carries a significantly higher 3A-40B:C rating — better coverage for ordinary combustibles and four times the flammable-liquid coverage. If your code or risk assessment calls for a higher B rating in a 5 lb package, specify the MP5A.

Manufacturer Resources

Product Specs

FE Agent:
Multi-Purpose Dry Chemical
FE C-Class Fire Capacity:
Yes
Conforms to Test Standards:
CAN/ULC-S504 — ANSI/UL299 & CAN/ULC S508 — ANSI/UL711
Temperature Range:
-65° F (-53° C) to 120° F (49° C)
Product Group:
Fire Extinguishers
Product Subgroup:
Fire Extinguishers
Product Type:
Fire Extinguishers
Department:
Safety
Product Material:
Aluminum

Amerex MP5 – Frequently Asked Questions

1) Can I use an Amerex ABC dry chemical extinguisher on a live electrical panel or in a server room?
On a panel or in an electrical room, yes. The mono ammonium phosphate agent is non-conductive, so it can be discharged on energized equipment, and every MP model carries the C rating. A server room is the case to think twice about. Dry chemical leaves a fine powder that settles into boards and connectors and is corrosive to electronics, so where the hardware itself is the thing you are protecting, a clean agent extinguisher that leaves no residue is the better tool at the rack. Switchgear rooms, panel areas, motor control centers and mechanical spaces are exactly what the MP Series is for.
2) Can I use an ABC dry chemical extinguisher in a commercial kitchen instead of a Class K unit?
Not as the unit at the cooking line. The MP Series is rated for Class A, B and C only. Cooking oil and grease in a fryer, range or under a hood is Class K, and that hazard needs a wet chemical Class K extinguisher, which saponifies the oil and does not risk splashing hot grease the way a dry chemical discharge can. An MP unit is still the right choice for the rest of the kitchen area, dry storage, back of house and the service corridor, so most food service spaces end up carrying both.
3) Should I buy an ABC multi-purpose extinguisher or a BC dry chemical for a mechanical room?
ABC is the general answer, and it is what the MP Series is. Its mono ammonium phosphate agent fuses and insulates burning Class A material, smothers flammable liquids, and is non-conductive for energized equipment, so one unit covers a room that has cardboard, oil and a live panel in it. A sodium bicarbonate BC extinguisher will knock down a liquid or electrical fire fast but does nothing to stop ordinary combustibles from reigniting, which is why BC is normally reserved for dedicated fuel handling or flammable liquid areas rather than general mechanical spaces. If a room has any ordinary combustible load at all, go ABC.
4) Are the Amerex MP extinguishers UL listed for a code submittal?
UL Listed and ULC Listed, conforming to ANSI/UL299, ANSI/UL711, CAN/ULC-S504 and CAN/ULC S508. UL 711 is the rating and fire testing standard, which is where the 2A-10B:C style ratings come from, and UL 299 is the construction and performance standard for dry chemical extinguishers. For a submittal package, the rating you cite is per model: 1A-10B:C for the MP2.5, 2A-10B:C for the MP5 and MP6, 3A-40B:C for the MP5A, 4A-60B:C for the MP10 and 10A-120B:C for the MP20.
5) We manage properties in both the US and Canada. Are Amerex MP extinguishers accepted north of the border?
They are ULC Listed as well as UL Listed, and conform to CAN/ULC-S504 and CAN/ULC S508 alongside the ANSI/UL299 and ANSI/UL711 standards. That means the same MP model can be specified for a Canadian property and a US one, which keeps one part number across a portfolio instead of a separate Canadian line item.
How fast can I get the Amerex MP5 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Amerex MP5 come with a warranty?
Absolutely. The Amerex MP5 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Amerex MP5?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Amerex MP5 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.